Which bobbins does this machine use?
Before you use this answer
Use the specified plastic Class 15 bobbin and follow the loading directions. Other bobbins and cross-brand replacements are not confirmed.
Documents and page references →Machine reference
bernette b05 ACADEMY
Needles, bobbins, feet and other details for this model. Check the requirements before choosing parts.
Before choosing a part
Compatibility essentials
Start with these documented details. Read the requirements with each answer before choosing a needle, bobbin or foot.
- Foot attachment
Switch off and unplug before changing the presser foot. The sole snaps onto a separate holder. Position the sole’s pin under the holder’s notch and lower the foot until they engage. Use the rear lever to release the sole.
Requirements and sources →- Foot holder / mount
Switch off and unplug before removing or refitting the holder. The holder is removable and attaches to the presser bar with its own screw.
Requirements and sources →- Bobbin type / class
Use plastic Class 15 bobbins.
Requirements and sources →- Bobbin material
- Needle system / designation
Use household needle system 130/705H.
Requirements and sources →- Needle sizes by fabric and use
The manual recommends sizes 70 or 75 for lightweight fabric, 80 or 90 for medium fabric, and 100 or 110 for heavy fabric.
Requirements and sources →- Stitch-width and stitch-length controls
Stitch width is adjustable from 0 to 6 mm. Black stitch patterns allow 0 to 4 mm stitch length.
Requirements and sources →
Not yet confirmed here: Manufacturer accessory group, Presser-foot shank type, Foot interface / generation, Bobbin diameter, Bobbin height, Hook type, Maximum stitch / zigzag width, Feed system, Bobbin loading direction. What is still to confirm →
Model & names
- Model
- bernette b05 ACADEMY
Other names, regional versions and related models have not been confirmed here. A shared manual, product line or accessory group does not identify the machine's family.
What do you need help with?
Which needle system and sizes should I use?
Before you use this answer
Keep the fabric and thread guidance with each size. Switch off and unplug before changing a needle; follow the complete needle-changing precautions.
Documents and page references →How does the presser foot attach?
Before you use this answer
Switch off and unplug before changing a foot or its holder. The sole snaps onto a separate screw-fastened holder. This does not identify a standard shank size or confirm a generic replacement foot or adapter.
Documents and page references →How do the stitch-width and length controls work?
Before you use this answer
The 0–6 mm width dial is a control range, not a promise that every stitch can be sewn at 6 mm. Keep the selected pattern, buttonhole range, foot and needle-clearance instructions together.
Documents and page references →What should I check before cleaning the feed and bobbin area?
Before you use this answer
Switch off and unplug before cleaning or removing covers. Follow the complete illustrated removal and refitting sequence.
Documents and page references →Which foot controller and electrical rating does the manual list?
Before you use this answer
Check the rating plate and controller on your own machine. The manual’s alternative regional ratings do not mean every unit accepts all listed voltages.
Documents and page references →More questions (2)
How do I wind the bobbin and return to sewing?
Before you use this answer
Return the bobbin winder to sewing mode. The cited steps do not promise an automatic full-bobbin stop.
Documents and page references →How do I guide fabric around a corner?
Before you use this answer
Stop with the needle in the fabric before raising the foot and turning. This does not establish an automatic needle-down feature.
Documents and page references →Manuals, parts books & more
Manuals & manufacturer documents
Available documents & sources
Publisher links below distinguish a matched file from a listing.
Choose the document for your task: an instruction manual, service manual, parts list and accessory guide answer different questions.
About this document & page references →
Instruction manualbernette b05 ACADEMY User Manual (2026-04 EN)
Read the source document ↗
We checked that this file matched the source used here on 2026-10-23. The publisher may later replace its file.
Needle, bobbin & presser-foot details
Read the model-specific requirements with each answer before choosing parts.
Needle
System
Use household needle system 130/705H.
Sizes and fabric use
Read needle, fabric and setup requirements
- Choose the needle and thread combination for the fabric; size alone does not establish every point style or special-use needle.
The manual recommends sizes 70 or 75 for lightweight fabric, 80 or 90 for medium fabric, and 100 or 110 for heavy fabric.
Sources and pages
Needle insertion
Read needle, fabric and setup requirements
- Use a straight, undamaged needle and switch power off before replacement.
Insert the needle fully upward with the flat side facing back, then tighten the holder screw.
Sources and pages
Bobbin
Class material
Read bobbin and setup requirements
- The manual says proper function cannot be guaranteed with other bobbins; this does not establish dimensions or every safe substitution.
Use plastic Class 15 bobbins.
Sources and pages
Bobbin insertion
Read bobbin and setup requirements
- Raise the needle and presser foot and switch off the machine before opening the bobbin cover.
Insert an evenly wound bobbin so its thread is wound counterclockwise.
Sources and pages
Bobbin dimensions and substitutes
Not yet verifiedRead bobbin and setup requirements
- Exact bobbin dimensions, detailed profile and cross-brand substitution rules are not established.
Hook type
Not yet verifiedRead bobbin and setup requirements
- The manual names a bobbin case and shuttle race but does not establish a standard hook orientation or drive type.
Winding mode and return to sewing
Read bobbin and setup requirements
- An automatic full-bobbin motor stop and sewing while winding are not confirmed. Keep the specified plastic Class 15 bobbin and counterclockwise loading instructions. For b05 ACADEMY and its English April 2026 manual, code 5020205.3.04, only. Switch off before threading. Switch off and unplug before changing a needle or foot, removing covers, oiling or cleaning, following the relevant chapter. Required accessories may be optional and local bundles may vary. We have not inspected a physical machine or its rating plate, confirmed replacement-part interchange or the fit of a seller’s item, or established service procedures beyond the cited instructions. Separate draft guide material is not used for these instructions.
Route through the winding guides/pretension and bobbin hole, push the winder right, and use the pedal. Stop after a few rotations to trim the end, continue winding, then release the pedal. Return the winder left to sewing mode before removal/cutting; sewing is not possible while winding mode is engaged.
Sources and pages
bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 31 · printed page 31bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 32 · printed page 32bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 33 · printed page 33bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 7 · printed page 7bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 22 · printed page 22bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 23 · printed page 23
Bringing lower thread up
Read bobbin and setup requirements
- Switch off for threading and needle-area setup. These steps do not change the specified bobbin class or loading direction, or confirm bobbin dimensions. For b05 ACADEMY and its English April 2026 manual, code 5020205.3.04, only. Switch off before threading. Switch off and unplug before changing a needle or foot, removing covers, oiling or cleaning, following the relevant chapter. Required accessories may be optional and local bundles may vary. We have not inspected a physical machine or its rating plate, confirmed replacement-part interchange or the fit of a seller’s item, or established service procedures beyond the cited instructions. Separate draft guide material is not used for these instructions.
With threading prepared, hold the upper thread with the left hand and turn the handwheel counterclockwise through a complete needle cycle until the take-up is highest. Pull the upper thread to bring the bobbin loop through, then take both ends about 10 cm (4 in) back under the foot.
Sources and pages
bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 34 · printed page 34bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 35 · printed page 35bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 7 · printed page 7bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 22 · printed page 22bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 23 · printed page 23
Presser foot
Changing the snap-on presser-foot sole
Read the requirements for this answer
- Switch off and unplug before changing the foot or holder. This describes ordinary snap-on sole attachment. It does not identify a standard shank size, confirm generic screw-on-foot fit or establish third-party adapter compatibility.
Switch off and unplug before changing the presser foot. The sole snaps onto a separate holder. Position the sole’s pin under the holder’s notch and lower the foot until they engage. Use the rear lever to release the sole.
Removable holder
Read the requirements for this answer
- Switch off and unplug before changing the foot or holder. The separate holder is screw-fastened to the presser bar. This does not confirm that a generic screw-on foot fits the bar.
Switch off and unplug before removing or refitting the holder. The holder is removable and attaches to the presser bar with its own screw.
Sources and pages
Pressure control
Read the requirements for this answer
- Do not reduce the setting below 0 because the manual says the fabric will not feed.
Presser-foot pressure is adjustable with its dial.
Sources and pages
Included standard feet
Read the requirements for this answer
- The overview follows the included-accessories section. This list does not authorize unlisted third-party equivalents.
The manual’s presser-foot overview lists zigzag, zipper, sliding buttonhole, blindstitch, overlock, concealed-zipper, darning/embroidery, button-sew-on, hemmer, open transparent embroidery, sliding-sole zigzag and edgestitch feet.
Standard presser-foot shank type
Not yet verifiedRead the requirements for this answer
- The reviewed manual does not classify the b05 ACADEMY as low shank, high shank or another standardized shank type.
Generic screw-on feet
Not yet verifiedRead the requirements for this answer
- The removable screw-mounted holder does not establish generic screw-on presser-foot compatibility.
Third-party presser-foot adapters
Not yet verifiedRead the requirements for this answer
- No third-party presser-foot adapter compatibility is established.
Pressure direction and zero limit
Read the requirements for this answer
- Do not reduce pressure below 0: the manual warns that fabric will not feed. No numerical pressure unit or universal setting for fabric thickness is specified. For b05 ACADEMY and its English April 2026 manual, code 5020205.3.04, only. Switch off before threading. Switch off and unplug before changing a needle or foot, removing covers, oiling or cleaning, following the relevant chapter. Required accessories may be optional and local bundles may vary. We have not inspected a physical machine or its rating plate, confirmed replacement-part interchange or the fit of a seller’s item, or established service procedures beyond the cited instructions. Separate draft guide material is not used for these instructions.
Clockwise increases foot pressure and counterclockwise reduces it. The manual warns not to reduce pressure below 0 because fabric will not feed.
Sources and pages
Documented functions
Read the requirements for this answer
- The listed tasks apply to these named feet. A name or picture does not identify an OEM replacement number, a standard shank type or a compatible third-party foot. For b05 ACADEMY and its English April 2026 manual, code 5020205.3.04, only. Switch off before threading. Switch off and unplug before changing a needle or foot, removing covers, oiling or cleaning, following the relevant chapter. Required accessories may be optional and local bundles may vary. We have not inspected a physical machine or its rating plate, confirmed replacement-part interchange or the fit of a seller’s item, or established service procedures beyond the cited instructions. Separate draft guide material is not used for these instructions.
Zigzag foot serves practical/decorative stitches and hems; zipper foot sews zippers; buttonhole foot with slide makes buttonholes with or without filler cord; blindstitch foot makes blind hems; overlock foot makes overlock-type stitches/edge finishing; concealed-zipper foot sews concealed zippers. The second table adds darning/embroidery for darning, embroidery and freehand quilting; button-sew-on for 2 or 4 holes; hemmer for double-turned hems; open transparent embroidery for appliqué/decorative/buttonhole stitches; sliding-sole zigzag for difficult-to-feed leather/plastic/vinyl; edgestitch for edges, parallel hems, lace or braid.
Sources and pages
bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 13 · printed page 13bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 14 · printed page 14bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 7 · printed page 7bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 22 · printed page 22bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 23 · printed page 23
Hump compensation
Read the requirements for this answer
- This describes the specified zigzag-foot mechanism and height tool, not automatic electronic thickness detection or a maximum lift rating. For b05 ACADEMY and its English April 2026 manual, code 5020205.3.04, only. Switch off before threading. Switch off and unplug before changing a needle or foot, removing covers, oiling or cleaning, following the relevant chapter. Required accessories may be optional and local bundles may vary. We have not inspected a physical machine or its rating plate, confirmed replacement-part interchange or the fit of a seller’s item, or established service procedures beyond the cited instructions. Separate draft guide material is not used for these instructions.
Press the black knob before lowering the foot to keep it level at a thick start. At a hump, stop needle-down, raise the foot, hold it horizontal with the knob and lower it. The foot returns automatically after a few stitches. Height plates can be placed behind the needle to level the sole.
Sources and pages
bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 40 · printed page 40bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 40 · printed page 40bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 41 · printed page 41bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 7 · printed page 7bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 22 · printed page 22bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 23 · printed page 23
Finger guard installation
Read the requirements for this answer
- Switch off before working near the needle or foot. The guard reduces proximity to the needle but does not guarantee injury prevention. These instructions apply to ACADEMY, not CRAFTER. For b05 ACADEMY and its English April 2026 manual, code 5020205.3.04, only. Switch off before threading. Switch off and unplug before changing a needle or foot, removing covers, oiling or cleaning, following the relevant chapter. Required accessories may be optional and local bundles may vary. We have not inspected a physical machine or its rating plate, confirmed replacement-part interchange or the fit of a seller’s item, or established service procedures beyond the cited instructions. Separate draft guide material is not used for these instructions.
Raise the foot, remove its sole and holder, attach the guard to the holder screw, refit the holder and sole, then check the guard is parallel to the sole and adjust its screw if needed.
Sources and pages
bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 25 · printed page 25bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 26 · printed page 26bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 7 · printed page 7bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 22 · printed page 22bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 23 · printed page 23
Zipper side selection
Read the requirements for this answer
- The zipper chapter describes light fabric tension. Keep the general instruction to guide fabric gently; do not treat this as permission to pull or push fabric during other sewing, or to use any needle position. For b05 ACADEMY and its English April 2026 manual, code 5020205.3.04, only. Switch off before threading. Switch off and unplug before changing a needle or foot, removing covers, oiling or cleaning, following the relevant chapter. Required accessories may be optional and local bundles may vary. We have not inspected a physical machine or its rating plate, confirmed replacement-part interchange or the fit of a seller’s item, or established service procedures beyond the cited instructions. Separate draft guide material is not used for these instructions.
For the left zipper side attach the right pin of the zipper foot; for the right side attach its left pin. Stop with the needle down and raise the foot when moving the slider. Use straight stitch and center needle.
Sources and pages
bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 44 · printed page 44bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 45 · printed page 45bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 7 · printed page 7bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 22 · printed page 22bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 23 · printed page 23bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 6 · printed page 6bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 44 · printed page 44bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 45 · printed page 45
Concealed zipper grooves
Read the requirements for this answer
- The left/right groove directions apply to this foot and method. An OEM replacement number and the fit of a seller’s replacement have not been confirmed. For b05 ACADEMY and its English April 2026 manual, code 5020205.3.04, only. Switch off before threading. Switch off and unplug before changing a needle or foot, removing covers, oiling or cleaning, following the relevant chapter. Required accessories may be optional and local bundles may vary. We have not inspected a physical machine or its rating plate, confirmed replacement-part interchange or the fit of a seller’s item, or established service procedures beyond the cited instructions. Separate draft guide material is not used for these instructions.
Use straight stitch A, width 0 and center needle. The right zipper spiral is guided through the right foot groove and the left spiral through the left groove; the lower seam is completed after changing to the zigzag foot.
Sources and pages
bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 45 · printed page 45bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 46 · printed page 46bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 7 · printed page 7bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 22 · printed page 22bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 23 · printed page 23
Edge guide and parallel seams
Read the requirements for this answer
- Foot-specific left/right settings are not interchangeable. No universal seam allowance from an unlabelled image or third-party guide fit. For b05 ACADEMY and its English April 2026 manual, code 5020205.3.04, only. Switch off before threading. Switch off and unplug before changing a needle or foot, removing covers, oiling or cleaning, following the relevant chapter. Required accessories may be optional and local bundles may vary. We have not inspected a physical machine or its rating plate, confirmed replacement-part interchange or the fit of a seller’s item, or established service procedures beyond the cited instructions. Separate draft guide material is not used for these instructions.
The manual offers narrow edge work using the zigzag, blindstitch or edgestitch foot and task-specific needle positions. For parallel seams, set the seam guide to the required distance and guide along an existing seam; stitch-plate markings use the center needle as reference.
Sources and pages
bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 51 · printed page 51bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 52 · printed page 52bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 7 · printed page 7bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 22 · printed page 22bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 23 · printed page 23
Narrow hemmer sequence
Read the requirements for this answer
- The manual says “Hold the 4 threads” in this ordinary-sewing sequence. That count remains unclear; this is not a complete hemmer guide. Foot availability varies by model and country. For b05 ACADEMY and its English April 2026 manual, code 5020205.3.04, only. Switch off before threading. Switch off and unplug before changing a needle or foot, removing covers, oiling or cleaning, following the relevant chapter. Required accessories may be optional and local bundles may vary. We have not inspected a physical machine or its rating plate, confirmed replacement-part interchange or the fit of a seller’s item, or established service procedures beyond the cited instructions. Separate draft guide material is not used for these instructions.
Use straight A, width 0 and the hemmer. Double-fold about 3 mm over the first 5 cm, sew 4–5 stitches, stop and raise needle/foot, then pull the fabric back 10–15 cm without cutting the thread to help feed the fold into the hemmer.
Sources and pages
bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 53 · printed page 53bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 7 · printed page 7bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 22 · printed page 22bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 23 · printed page 23bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 53 · printed page 53
Blind hem selection and guide
Read the requirements for this answer
- Use the documented stitch/foot/material combination and test; no fixed universal width or hidden electronic blindhem setting. For b05 ACADEMY and its English April 2026 manual, code 5020205.3.04, only. Switch off before threading. Switch off and unplug before changing a needle or foot, removing covers, oiling or cleaning, following the relevant chapter. Required accessories may be optional and local bundles may vary. We have not inspected a physical machine or its rating plate, confirmed replacement-part interchange or the fit of a seller’s item, or established service procedures beyond the cited instructions. Separate draft guide material is not used for these instructions.
Choose the blind stitch for firm fabrics or elastic blind stitch for stretch material. Finish/fold the edge and adjust width while turning the handwheel so the needle only just catches the fold. Set the foot guide against the fold.
Sources and pages
Specifications & documented facts
Specifications apply to the named model and document edition. Read any setup, fabric or safety requirements with the answer.
Button
Sewing on and hole clearance
Read the requirements for this answer
- An automatic buttonhole motor stop, a numerical maximum for hole spacing and a complete four-hole repositioning sequence are not specified here. The button-sew-on foot may be optional on CRAFTER. For b05 ACADEMY and its English April 2026 manual, code 5020205.3.04, only. Switch off before threading. Switch off and unplug before changing a needle or foot, removing covers, oiling or cleaning, following the relevant chapter. Required accessories may be optional and local bundles may vary. We have not inspected a physical machine or its rating plate, confirmed replacement-part interchange or the fit of a seller’s item, or established service procedures beyond the cited instructions. Separate draft guide material is not used for these instructions.
Use zigzag B with the zigzag or button-sew-on foot and lowered feed. Turn the handwheel to check the needle enters the holes and adjust width to their spacing; sew about 10 stitches. For a thread shank leave about 10 cm tails, wrap under the button and secure on the wrong side. The source says sew the front two holes first for a four-hole button.
Sources and pages
Buttonhole
Buttonhole program and length
Read the requirements for this answer
- “Automatic” describes buttonhole formation; it does not promise the motor stops when the buttonhole is finished. The inch fraction was checked against the page image. For b05 ACADEMY and its English April 2026 manual, code 5020205.3.04, only. Switch off before threading. Switch off and unplug before changing a needle or foot, removing covers, oiling or cleaning, following the relevant chapter. Required accessories may be optional and local bundles may vary. We have not inspected a physical machine or its rating plate, confirmed replacement-part interchange or the fit of a seller’s item, or established service procedures beyond the cited instructions. Separate draft guide material is not used for these instructions.
The single-step buttonhole program uses a button in the sliding foot to set length, allowing for the button’s diameter and thickness. The manual gives a maximum buttonhole length of 3 cm (1 3/16 in).
Sources and pages
bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 61 · printed page 61bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 61 · printed page 61bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 7 · printed page 7bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 22 · printed page 22bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 23 · printed page 23
Filler cord and cutting protection
Read the requirements for this answer
- Switch off when handling the foot or needle area. Use the full illustrated buttonhole and cutting precautions; this short answer is not a complete cutting guide. For b05 ACADEMY and its English April 2026 manual, code 5020205.3.04, only. Switch off before threading. Switch off and unplug before changing a needle or foot, removing covers, oiling or cleaning, following the relevant chapter. Required accessories may be optional and local bundles may vary. We have not inspected a physical machine or its rating plate, confirmed replacement-part interchange or the fit of a seller’s item, or established service procedures beyond the cited instructions. Separate draft guide material is not used for these instructions.
Use mercerized yarn or fine crochet thread as filler on stretch/coat fabrics. Hook the cord behind the foot and tie its ends temporarily in front, sew over it, draw the loop into the bartack and secure ends on the wrong side. Before cutting, place a pin at each end directly under the locking stitch to protect those stitches from the seam ripper.
Sources and pages
bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 61 · printed page 61bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 62 · printed page 62bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 64 · printed page 64bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 7 · printed page 7bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 22 · printed page 22bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 23 · printed page 23bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 64 · printed page 64
Performance & stitch capabilities
Maximum sewing speed
Read the requirements for this answer
- These are the manual’s two main-switch speed settings.
The fast switch setting is rated at up to 1,100 stitches per minute; the slow setting is up to 650 stitches per minute.
Sources and pages
Stitch width and length
Read the requirements for this answer
- Buttonholes use their marked dial range; red and gray patterns have predefined stitch length.
Stitch width is adjustable from 0 to 6 mm. Black stitch patterns allow 0 to 4 mm stitch length.
Sources and pages
Bed configuration
The machine has a free arm for tubular projects such as cuffs, trouser hems and sleeve ends.
Sources and pages
Feed dog control
The feed dog can be lowered with the lever and raises again when the first stitch is sewn after moving the lever right.
Sources and pages
Controls
Pedal and speed-switch positions
Read the requirements for this answer
- Use the ACADEMY switch’s quick and slow positions with the pedal. An automatic stop, needle-stop button or electronic memory has not been confirmed. For b05 ACADEMY and its English April 2026 manual, code 5020205.3.04, only. Switch off before threading. Switch off and unplug before changing a needle or foot, removing covers, oiling or cleaning, following the relevant chapter. Required accessories may be optional and local bundles may vary. We have not inspected a physical machine or its rating plate, confirmed replacement-part interchange or the fit of a seller’s item, or established service procedures beyond the cited instructions. Separate draft guide material is not used for these instructions.
Press the pedal gently to start, press farther for more speed, and release it to stop. The ACADEMY main switch has quick and slow positions, marked with a rabbit and snail. The manual lists up to 1,100 stitches per minute in the quick position and 650 in the slow position.
Sources and pages
bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 17 · printed page 17bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 18 · printed page 18bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 17 · printed page 17bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 7 · printed page 7bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 22 · printed page 22bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 23 · printed page 23
Pattern selector and color modes
Read the requirements for this answer
- Mechanical selector setting, not a touchscreen selection or electronic program-memory claim. For b05 ACADEMY and its English April 2026 manual, code 5020205.3.04, only. Switch off before threading. Switch off and unplug before changing a needle or foot, removing covers, oiling or cleaning, following the relevant chapter. Required accessories may be optional and local bundles may vary. We have not inspected a physical machine or its rating plate, confirmed replacement-part interchange or the fit of a seller’s item, or established service procedures beyond the cited instructions. Separate draft guide material is not used for these instructions.
Raise the needle fully before turning the pattern selector. Select black patterns with the length dial between 0 and 4, red patterns with S1 and gray patterns with S2; align the chosen category beneath the dot. Each A–L category can contain up to three patterns.
Sources and pages
Length modes and width change safety
Read the requirements for this answer
- The width-dial and black-pattern length ranges do not establish safe clearance for special needles. Keep the buttonhole range and fixed red/gray pattern lengths separate; raise the needle fully before changing width. For b05 ACADEMY and its English April 2026 manual, code 5020205.3.04, only. Switch off before threading. Switch off and unplug before changing a needle or foot, removing covers, oiling or cleaning, following the relevant chapter. Required accessories may be optional and local bundles may vary. We have not inspected a physical machine or its rating plate, confirmed replacement-part interchange or the fit of a seller’s item, or established service procedures beyond the cited instructions. Separate draft guide material is not used for these instructions.
The manual says red and gray pattern lengths are predefined and cannot be changed. Black patterns use their length range; buttonholes use the buttonhole-symbol range. Raise the needle fully before turning the width dial.
Sources and pages
Upper tension and stitch balance
Read the requirements for this answer
- The setting depends on material, layers and sewing task. This does not instruct you to adjust a bobbin-case tension screw or specify tension as a force in grams. For b05 ACADEMY and its English April 2026 manual, code 5020205.3.04, only. Switch off before threading. Switch off and unplug before changing a needle or foot, removing covers, oiling or cleaning, following the relevant chapter. Required accessories may be optional and local bundles may vary. We have not inspected a physical machine or its rating plate, confirmed replacement-part interchange or the fit of a seller’s item, or established service procedures beyond the cited instructions. Separate draft guide material is not used for these instructions.
Base upper tension is 4. A higher dial value increases tension; lower decreases it. For the manual’sstraight-stitch check, visible bobbin thread on the right side calls for lower upper tension; visible upper thread on the wrong side calls for higher upper tension.
Sources and pages
Mechanical balance dial
Read the requirements for this answer
- Keep the selected stitch and test fabric together. This mechanical adjustment is not an electronic recalibration or factory reset. For b05 ACADEMY and its English April 2026 manual, code 5020205.3.04, only. Switch off before threading. Switch off and unplug before changing a needle or foot, removing covers, oiling or cleaning, following the relevant chapter. Required accessories may be optional and local bundles may vary. We have not inspected a physical machine or its rating plate, confirmed replacement-part interchange or the fit of a seller’s item, or established service procedures beyond the cited instructions. Separate draft guide material is not used for these instructions.
After selecting a stretch stitch or buttonhole and length, use a coin in the balance dial. Clockwise increases left buttonhole-bead/stretch-stitch density; counterclockwise reduces it.
Sources and pages
bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 38 · printed page 38bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 39 · printed page 39bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 7 · printed page 7bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 22 · printed page 22bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 23 · printed page 23
Reverse and seam securing
Read the requirements for this answer
- An automatic seam-locking program, a latched one-touch reverse control, and reverse operation for every special stitch have not been confirmed. For b05 ACADEMY and its English April 2026 manual, code 5020205.3.04, only. Switch off before threading. Switch off and unplug before changing a needle or foot, removing covers, oiling or cleaning, following the relevant chapter. Required accessories may be optional and local bundles may vary. We have not inspected a physical machine or its rating plate, confirmed replacement-part interchange or the fit of a seller’s item, or established service procedures beyond the cited instructions. Separate draft guide material is not used for these instructions.
Hold the quick reverse lever down while pressing the pedal for reverse sewing; release it to sew forward. The seam-securing chapter uses reverse sewing at the beginning and end of a seam.
Sources and pages
bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 39 · printed page 39bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 40 · printed page 40bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 7 · printed page 7bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 22 · printed page 22bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 23 · printed page 23
Decorative
Open joining and shell edge
Read the requirements for this answer
- The shell-edge heading says Vari-Overlock, but the instructions say H; the stitch table assigns Vari-Overlock to D and shell edging to H. This difference remains unresolved. Do not silently substitute D for H; this is not a complete shell-edge guide. For b05 ACADEMY and its English April 2026 manual, code 5020205.3.04, only. Switch off before threading. Switch off and unplug before changing a needle or foot, removing covers, oiling or cleaning, following the relevant chapter. Required accessories may be optional and local bundles may vary. We have not inspected a physical machine or its rating plate, confirmed replacement-part interchange or the fit of a seller’s item, or established service procedures beyond the cited instructions. Separate draft guide material is not used for these instructions.
The manual describes faggoting/open joins with a 4 mm gap and temporary backing. Its shell-edge section has a Vari-Overlock heading but instructs stitch category H; the practical table calls D Vari-Overlock and H shell edging. Keep those exact occurrences separate.
Sources and pages
bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 58 · printed page 58bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 59 · printed page 59bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 42 · printed page 42bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 7 · printed page 7bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 22 · printed page 22bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 23 · printed page 23bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 59 · printed page 59bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 42 · printed page 42
Maintenance specifications
Cleaning safely and refitting parts
Read the safety and removal/refitting limits
- Follow the complete power-isolation, removal and refitting instructions. The bobbin-case chapter says “Set needle to topmost position” after the needle has been removed; that step order remains unclear. For b05 ACADEMY and its English April 2026 manual, code 5020205.3.04, only. Switch off before threading. Switch off and unplug before changing a needle or foot, removing covers, oiling or cleaning, following the relevant chapter. Required accessories may be optional and local bundles may vary. We have not inspected a physical machine or its rating plate, confirmed replacement-part interchange or the fit of a seller’s item, or established service procedures beyond the cited instructions. Separate draft guide material is not used for these instructions.
Switch OFF and disconnect before cleaning near the needle/hook or removing covers. The feed-dog-cleaning sequence removes foot/needle, lowers feed and removes the plate for brushing; it refits plate/cover, raises feed and refits needle/foot before reconnecting power.
Sources and pages
bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 68 · printed page 68bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 69 · printed page 69bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 7 · printed page 7bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 22 · printed page 22bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 23 · printed page 23bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 69 · printed page 69bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 71 · printed page 71
Owner features
Upper threading
Read the safety and removal/refitting limits
- Raise the presser foot and needle and follow the full illustrated path in the manual.
Place the spool so thread unwinds clockwise, use the correct spool cap, then route through the guide, pretension, take-up lever and guides above the needle.
Feed dog cleaning
Read the safety and removal/refitting limits
- Switch off and unplug, then remove the presser foot, needle, bobbin cover and stitch plate as directed.
Remove thread remnants under the stitch plate and clean the feed dog with the brush.
Sources and pages
Bobbin area cleaning
Read the safety and removal/refitting limits
- Switch off and unplug and remove the foot, needle, covers, plate and bobbin before cleaning.
Clean the bobbin case and shuttle race with the brush.
Sources and pages
Needle bar lubrication
Read the safety and removal/refitting limits
- Switch off and unplug first. Use only oil recommended by bernette and follow the cover-removal procedure.
For frequent use, oil the needle-bar movement every six months with one drop at the marked mechanisms, turn the handwheel and wipe away excess.
Power
Electrical ratings by version
Check voltage, country version and controller
- Check your machine’s rating plate, supply frequency, country version and controller label. We have not inspected your unit. Do not convert 0.7 A into an assumed wattage, 90 W into an assumed current, or treat either as motor output. These entries do not establish a suitable travel transformer or adapter. For b05 ACADEMY and its English April 2026 manual, code 5020205.3.04, only. Switch off before threading. Switch off and unplug before changing a needle or foot, removing covers, oiling or cleaning, following the relevant chapter. Required accessories may be optional and local bundles may vary. We have not inspected a physical machine or its rating plate, confirmed replacement-part interchange or the fit of a seller’s item, or established service procedures beyond the cited instructions. Separate draft guide material is not used for these instructions.
The technical table lists two separate electrical versions: 120 V, 0.7 A; and 230/240 V, 90 W. It lists protection class II. These alternatives do not mean an individual machine accepts the whole 120–240 V range.
Sources and pages
Controller cord and plug
Check voltage, country version and controller
- CRAFTER’s FC controller designations differ from ACADEMY’s KD designations. A suitable cable does not convert voltage or confirm that another controller is interchangeable. For b05 ACADEMY and its English April 2026 manual, code 5020205.3.04, only. Switch off before threading. Switch off and unplug before changing a needle or foot, removing covers, oiling or cleaning, following the relevant chapter. Required accessories may be optional and local bundles may vary. We have not inspected a physical machine or its rating plate, confirmed replacement-part interchange or the fit of a seller’s item, or established service procedures beyond the cited instructions. Separate draft guide material is not used for these instructions.
The safety page specifies the supplied foot control type KD-2902/KD-1902. Use the supplied power cable; the USA/Canada NEMA1-15 limit is 150 volt-to-ground. For another country, obtain a suitable cable from a bernette dealer. The USA/Canada plug is polarized: reverse it if necessary, contact an electrician if it still does not fit, and do not modify it.
Sources and pages
bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 6 · printed page 6bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 17 · printed page 17bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 7 · printed page 7bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 22 · printed page 22bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 23 · printed page 23
Quilting
Applique pivot
Read the requirements for this answer
- Switch off and unplug before changing a needle or foot. The open embroidery foot is not necessarily supplied with CRAFTER. Use the stated D/S2 pattern, keeping the S2 mode with its letter. For b05 ACADEMY and its English April 2026 manual, code 5020205.3.04, only. Switch off before threading. Switch off and unplug before changing a needle or foot, removing covers, oiling or cleaning, following the relevant chapter. Required accessories may be optional and local bundles may vary. We have not inspected a physical machine or its rating plate, confirmed replacement-part interchange or the fit of a seller’s item, or established service procedures beyond the cited instructions. Separate draft guide material is not used for these instructions.
Use the documented blanket-type D/S2 pattern and zigzag or open embroidery foot, temporarily hold the appliqué, and pivot with the needle down at the outer edge.
Sources and pages
Free motion prerequisites
Read the requirements for this answer
- The free-motion quilting chapter does not explicitly repeat the feed-dog lowering step found in the separate darning chapter. This omission remains unresolved; do not combine the chapters into a complete procedure without clarification. For b05 ACADEMY and its English April 2026 manual, code 5020205.3.04, only. Switch off before threading. Switch off and unplug before changing a needle or foot, removing covers, oiling or cleaning, following the relevant chapter. Required accessories may be optional and local bundles may vary. We have not inspected a physical machine or its rating plate, confirmed replacement-part interchange or the fit of a seller’s item, or established service procedures beyond the cited instructions. Separate draft guide material is not used for these instructions.
The quilting section explicitly requires an optional quilting plate and free-motion foot, recommends the extension table and secured quilt layers, sets stitch length 0 and secures the free-motion foot to the presser-foot bar with its screw. Fabric motion and pedal speed are coordinated by the operator.
Sources and pages
bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 65 · printed page 65bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 66 · printed page 66bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 7 · printed page 7bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 22 · printed page 22bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 23 · printed page 23bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 66 · printed page 66bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 48 · printed page 48
Patchwork seam reference
Read the requirements for this answer
- These are the manual’s project settings. They do not identify a universal quarter-inch foot, confirm that a patchwork foot is included, or establish a maximum stitch length. For b05 ACADEMY and its English April 2026 manual, code 5020205.3.04, only. Switch off before threading. Switch off and unplug before changing a needle or foot, removing covers, oiling or cleaning, following the relevant chapter. Required accessories may be optional and local bundles may vary. We have not inspected a physical machine or its rating plate, confirmed replacement-part interchange or the fit of a seller’s item, or established service procedures beyond the cited instructions. Separate draft guide material is not used for these instructions.
The patchwork section uses straight A,center needle,length 1–3 and zigzag or patchwork foot. It describes 5 mm seam allowance or the foot guide, pressing seams open, and centered decorative stitching over joined seams.
Sources and pages
bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 66 · printed page 66bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 67 · printed page 67bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 7 · printed page 7bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 22 · printed page 22bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 23 · printed page 23
Sewing
Corner pivoting
Read the requirements for this answer
- Stop and check the needle is in the fabric before raising the foot and turning. These instructions do not confirm an automatic needle-down setting. For b05 ACADEMY and its English April 2026 manual, code 5020205.3.04, only. Switch off before threading. Switch off and unplug before changing a needle or foot, removing covers, oiling or cleaning, following the relevant chapter. Required accessories may be optional and local bundles may vary. We have not inspected a physical machine or its rating plate, confirmed replacement-part interchange or the fit of a seller’s item, or established service procedures beyond the cited instructions. Separate draft guide material is not used for these instructions.
Stop with the needle in the fabric, raise the presser foot, use the needle as pivot, turn the fabric, lower the foot and continue.
Sources and pages
Straight stitch fabric settings
Read the requirements for this answer
- These are task-specific suggestions, not guaranteed settings for every material or a new maximum stitch length. Test your actual fabric, thread and needle combination. For b05 ACADEMY and its English April 2026 manual, code 5020205.3.04, only. Switch off before threading. Switch off and unplug before changing a needle or foot, removing covers, oiling or cleaning, following the relevant chapter. Required accessories may be optional and local bundles may vary. We have not inspected a physical machine or its rating plate, confirmed replacement-part interchange or the fit of a seller’s item, or established service procedures beyond the cited instructions. Separate draft guide material is not used for these instructions.
Straight stitch uses category A and width 0. The chapter recommends 3–4 mm length for denim and 2–2.5 mm for fine fabrics; thread-gimp work uses 3–4 mm.
Sources and pages
Stretch and reinforced stitch selection
Read the requirements for this answer
- A category letter can select different patterns in different length modes. An overlock-style stitch does not make this domestic machine a serger with a cutting knife. For b05 ACADEMY and its English April 2026 manual, code 5020205.3.04, only. Switch off before threading. Switch off and unplug before changing a needle or foot, removing covers, oiling or cleaning, following the relevant chapter. Required accessories may be optional and local bundles may vary. We have not inspected a physical machine or its rating plate, confirmed replacement-part interchange or the fit of a seller’s item, or established service procedures beyond the cited instructions. Separate draft guide material is not used for these instructions.
The manual covers triple straight A/S1, triple zigzag B/S1, super-stretch L for highly elastic seams and stitched zigzag C for finishing/reinforcement or elastic tape.
Sources and pages
bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 42 · printed page 42bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 47 · printed page 47bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 7 · printed page 7bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 22 · printed page 22bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 23 · printed page 23
Darning setup and manual feed
Read the requirements for this answer
- The required foot may be optional on CRAFTER. Restore normal feeding for ordinary sewing. This setup does not identify a standard shank or replacement-hook fit, and is not a procedure for powered maintenance. For b05 ACADEMY and its English April 2026 manual, code 5020205.3.04, only. Switch off before threading. Switch off and unplug before changing a needle or foot, removing covers, oiling or cleaning, following the relevant chapter. Required accessories may be optional and local bundles may vary. We have not inspected a physical machine or its rating plate, confirmed replacement-part interchange or the fit of a seller’s item, or established service procedures beyond the cited instructions. Separate draft guide material is not used for these instructions.
Remove the foot holder and secure the darning/embroidery foot with its lever on the needle-clamp screw. Select straight A, length 0 and lower the feed dog. The manual specifies a darning hoop and slide-on extension table, and describes moving the fabric by hand across the worn area.
Sources and pages
bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 48 · printed page 48bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 49 · printed page 49bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 7 · printed page 7bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 22 · printed page 22bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 23 · printed page 23
Edge finishing and overlock foot
Read the requirements for this answer
- These are domestic edge-finishing stitches, not a cutting knife, differential feed or industrial overlocker function. Check the complete task’s needle and foot requirements. For b05 ACADEMY and its English April 2026 manual, code 5020205.3.04, only. Switch off before threading. Switch off and unplug before changing a needle or foot, removing covers, oiling or cleaning, following the relevant chapter. Required accessories may be optional and local bundles may vary. We have not inspected a physical machine or its rating plate, confirmed replacement-part interchange or the fit of a seller’s item, or established service procedures beyond the cited instructions. Separate draft guide material is not used for these instructions.
For finishing edges, use the relevant zigzag/overlock-type stitch with the foot edge guide following the fabric edge. The chapter distinguishes vari-overlock and double-overlock stitch uses, including elastic fabrics.
Sources and pages
Basting
Read the requirements for this answer
- Use this manual’s 4 mm setting. A separate shared workbook’s general 4–5 mm suggestion does not extend this model’s manual beyond 4 mm. For b05 ACADEMY and its English April 2026 manual, code 5020205.3.04, only. Switch off before threading. Switch off and unplug before changing a needle or foot, removing covers, oiling or cleaning, following the relevant chapter. Required accessories may be optional and local bundles may vary. We have not inspected a physical machine or its rating plate, confirmed replacement-part interchange or the fit of a seller’s item, or established service procedures beyond the cited instructions. Separate draft guide material is not used for these instructions.
The basting recipe uses straight stitch A, width 0 and length 4, with fine darning thread. Its introductory recommendation is 3.5–4 mm. Pin the layers at right angles to the basting direction.
Sources and pages
bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 55 · printed page 55bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 7 · printed page 7bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 22 · printed page 22bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 23 · printed page 23bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 55 · printed page 55
Gathering and smocking
Read the requirements for this answer
- These temporary gathering settings are specific to the recipe. They are not the normal default or proof that any gathering foot fits. Restore the tension and settings needed for your project afterward. For b05 ACADEMY and its English April 2026 manual, code 5020205.3.04, only. Switch off before threading. Switch off and unplug before changing a needle or foot, removing covers, oiling or cleaning, following the relevant chapter. Required accessories may be optional and local bundles may vary. We have not inspected a physical machine or its rating plate, confirmed replacement-part interchange or the fit of a seller’s item, or established service procedures beyond the cited instructions. Separate draft guide material is not used for these instructions.
For gathering use straight A, width 0, length 4, center needle and upper tension no higher than 2. Sew parallel rows 5 mm apart with long tails, pull bobbin threads and distribute the gathers. Smocking uses a selected decorative stitch over gathered fabric, then removes the basting.
Sources and pages
bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 57 · printed page 57bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 57 · printed page 57bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 58 · printed page 58bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 7 · printed page 7bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 22 · printed page 22bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 23 · printed page 23
Specifications
Dimensions and weight
Read the requirements for this answer
- No packed dimensions, extension-table dimensions, accessory-inclusive weight or measured unit is established. For b05 ACADEMY and its English April 2026 manual, code 5020205.3.04, only. Switch off before threading. Switch off and unplug before changing a needle or foot, removing covers, oiling or cleaning, following the relevant chapter. Required accessories may be optional and local bundles may vary. We have not inspected a physical machine or its rating plate, confirmed replacement-part interchange or the fit of a seller’s item, or established service procedures beyond the cited instructions. Separate draft guide material is not used for these instructions.
The table labels width×depth×height 416 × 174 × 299 mm and weight 7.0 kg.
Sources and pages
Threading
Spool caps net and second pin
Read the requirements for this answer
- Choose the cap for the actual spool. These instructions do not confirm that cone stands or replacement caps are interchangeable. For b05 ACADEMY and its English April 2026 manual, code 5020205.3.04, only. Switch off before threading. Switch off and unplug before changing a needle or foot, removing covers, oiling or cleaning, following the relevant chapter. Required accessories may be optional and local bundles may vary. We have not inspected a physical machine or its rating plate, confirmed replacement-part interchange or the fit of a seller’s item, or established service procedures beyond the cited instructions. Separate draft guide material is not used for these instructions.
Choose a cap leaving no gap to the spool. The spool net is used only on the horizontal holder; secure it against slipping off. The second pin and felt disc support bobbin winding or multiple-needle threading.
Sources and pages
bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 18 · printed page 18bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 19 · printed page 19bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 7 · printed page 7bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 22 · printed page 22bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 23 · printed page 23
Integrated needle threader
Read the requirements for this answer
- Prepare with the foot raised, then lower it for the threader as directed. A minimum needle size or suitability for multiple needles has not been confirmed. For b05 ACADEMY and its English April 2026 manual, code 5020205.3.04, only. Switch off before threading. Switch off and unplug before changing a needle or foot, removing covers, oiling or cleaning, following the relevant chapter. Required accessories may be optional and local bundles may vary. We have not inspected a physical machine or its rating plate, confirmed replacement-part interchange or the fit of a seller’s item, or established service procedures beyond the cited instructions. Separate draft guide material is not used for these instructions.
Prepare with the machine OFF and needle/foot raised. Lower the foot for the threader; lightly lower its lever and take thread around the guide, lower and hold the lever fully, guide thread in front of the needle under the wire hook, then raise the lever with thread loose and pull the resulting loop through.
Sources and pages
bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 26 · printed page 26bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 29 · printed page 29bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 7 · printed page 7bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 22 · printed page 22bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 23 · printed page 23
Troubleshooting
Stitch faults and dealer boundary
Read the requirements for this answer
- Use this model’s specified needle system and fabric/size guidance. Hook timing, grinding a plate, adjusting case tension and repairing the electrical housing are not procedures covered here. For b05 ACADEMY and its English April 2026 manual, code 5020205.3.04, only. Switch off before threading. Switch off and unplug before changing a needle or foot, removing covers, oiling or cleaning, following the relevant chapter. Required accessories may be optional and local bundles may vary. We have not inspected a physical machine or its rating plate, confirmed replacement-part interchange or the fit of a seller’s item, or established service procedures beyond the cited instructions. Separate draft guide material is not used for these instructions.
The troubleshooting tables cover rethreading/tension, correct needle choice/insertion/condition and suitable thread for uneven stitches, skips or breaks. Damaged hook tip or stitch plate is referred to the dealer.
Sources and pages
bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 72 · printed page 72bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 73 · printed page 73bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 7 · printed page 7bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 22 · printed page 22bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 23 · printed page 23
No start feed and jam context
Read the requirements for this answer
- A troubleshooting row does not confirm an interlock that stops all motion. Turn the handwheel back and forth only in the stated jam-clearing context; normal manual positioning is counterclockwise. Stop and seek help for unresolved damage. For b05 ACADEMY and its English April 2026 manual, code 5020205.3.04, only. Switch off before threading. Switch off and unplug before changing a needle or foot, removing covers, oiling or cleaning, following the relevant chapter. Required accessories may be optional and local bundles may vary. We have not inspected a physical machine or its rating plate, confirmed replacement-part interchange or the fit of a seller’s item, or established service procedures beyond the cited instructions. Separate draft guide material is not used for these instructions.
The fault table checks power connection/switch and foot lowering. For unfavorable room temperature it says to place the machine in a warm room one hour before use. For thread caught in the hook it describes removing upper thread and bobbin case, turning the handwheel backwards and forwards by hand and removing thread remnants.
Sources and pages
bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 73 · printed page 73bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 72 · printed page 72bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 7 · printed page 7bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 22 · printed page 22bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 23 · printed page 23bernette b05 ACADEMY User Manual (2026-04 EN)PDF page 72 · printed page 72
Care, setup & service references
Use the full source procedure and its safety precautions. A short referenced answer is not a substitute for service documentation or qualified electrical/mechanical repair.
Service-manual availability and service-only procedures remain unestablished unless separately cataloged and reviewed.
Coverage and source-review limits
These answers use the model-specific English April 2026 instruction manual and its safety requirements. Some source instructions have unresolved wording or step order, noted with the answer. Standard shank type, hook classification, exact bobbin dimensions, broader substitutions and third-party fit remain unconfirmed. A document review is not hands-on testing.
Coverage and remaining questions
- Operating manual
- Listed below; check the edition and available link.
- Exact OEM part application
- No model-specific part application is listed here.
Still to confirm
An unanswered question does not mean a part is incompatible. We have not confirmed enough information to recommend it.
Presser foot — Standard presser-foot shank type: Not established Full recorded limit & conditions →
Presser foot — Generic screw-on feet: Not established Full recorded limit & conditions →
Presser foot — Third-party presser-foot adapters: Not established Full recorded limit & conditions →
Bobbin — Bobbin dimensions and substitutes: Not established Full recorded limit & conditions →
Bobbin — Hook type: Not established Full recorded limit & conditions →
Other names, regional versions, production history, further specifications and documents are not fully covered here. Their absence is not a “none exist” finding.
Sources and page references
Each answer links to its exact evidence passage below. Open a reference to see the document and page. These links identify the source; they do not include the full manual or its diagrams. Document access is consolidated in the OEM library above.
Document and page references (107)
bernette b05 ACADEMY User Manual (2026-04 EN)
Published by bernette · April 2026 · 5020205.3.04 · English
Document and available links →About this document →PDF page 1
Open the source document · PDF p. 1 ↗ About this document link
Applicability and edition
Checked as a transcription of the page image.
This manual identifies b05 ACADEMY. It does not establish features or compatibility for the other b05 model.
PDF page 6
Open the source document · PDF p. 6 ↗ About this document link
Applicability and edition
Checked against the document text.
This manual identifies b05 ACADEMY. It does not establish features or compatibility for the other b05 model.
PDF page 12
Open the source document · PDF p. 12 ↗ About this document link
Applicability and edition
Checked against the document text.
This manual identifies b05 ACADEMY. It does not establish features or compatibility for the other b05 model.
PDF page 13
Open the source document · PDF p. 13 ↗ About this document link
Applicability and edition
Checked against the document text.
This manual identifies b05 ACADEMY. It does not establish features or compatibility for the other b05 model.
PDF page 14
Open the source document · PDF p. 14 ↗ About this document link
Applicability and edition
Checked against the document text.
This manual identifies b05 ACADEMY. It does not establish features or compatibility for the other b05 model.
PDF page 15
Open the source document · PDF p. 15 ↗ About this document link
Applicability and edition
Checked against the document text.
This manual identifies b05 ACADEMY. It does not establish features or compatibility for the other b05 model.
PDF page 17
Open the source document · PDF p. 17 ↗ About this document link
Applicability and edition
Checked against the document text.
This manual identifies b05 ACADEMY. It does not establish features or compatibility for the other b05 model.
PDF page 19
Open the source document · PDF p. 19 ↗ About this document link
Applicability and edition
Checked against the document text.
This manual identifies b05 ACADEMY. It does not establish features or compatibility for the other b05 model.
PDF page 20
Open the source document · PDF p. 20 ↗ About this document link
Applicability and edition
Checked against the document text.
This manual identifies b05 ACADEMY. It does not establish features or compatibility for the other b05 model.
PDF page 23
Open the source document · PDF p. 23 ↗ About this document link
Applicability and edition
Checked against the document text.
This manual identifies b05 ACADEMY. It does not establish features or compatibility for the other b05 model.
PDF page 24
Open the source document · PDF p. 24 ↗ About this document link
Applicability and edition
Checked against the document text.
This manual identifies b05 ACADEMY. It does not establish features or compatibility for the other b05 model.
PDF page 25
Open the source document · PDF p. 25 ↗ About this document link
Applicability and edition
Checked against the document text.
This manual identifies b05 ACADEMY. It does not establish features or compatibility for the other b05 model.
PDF page 27
Open the source document · PDF p. 27 ↗ About this document link
Applicability and edition
Checked against the document text.
This manual identifies b05 ACADEMY. It does not establish features or compatibility for the other b05 model.
PDF page 28
Open the source document · PDF p. 28 ↗ About this document link
Applicability and edition
Checked against the document text.
This manual identifies b05 ACADEMY. It does not establish features or compatibility for the other b05 model.
PDF page 33
Open the source document · PDF p. 33 ↗ About this document link
Applicability and edition
Checked against the document text.
This manual identifies b05 ACADEMY. It does not establish features or compatibility for the other b05 model.
PDF page 37
Open the source document · PDF p. 37 ↗ About this document link
Applicability and edition
Checked against the document text.
This manual identifies b05 ACADEMY. It does not establish features or compatibility for the other b05 model.
PDF page 68
Open the source document · PDF p. 68 ↗ About this document link
Applicability and edition
Checked against the document text.
This manual identifies b05 ACADEMY. It does not establish features or compatibility for the other b05 model.
PDF page 69
Open the source document · PDF p. 69 ↗ About this document link
Applicability and edition
Checked against the document text.
This manual identifies b05 ACADEMY. It does not establish features or compatibility for the other b05 model.
PDF page 70
Open the source document · PDF p. 70 ↗ About this document link
Applicability and edition
Checked against the document text.
This manual identifies b05 ACADEMY. It does not establish features or compatibility for the other b05 model.
PDF page 71
Open the source document · PDF p. 71 ↗ About this document link
Applicability and edition
Checked against the document text.
This manual identifies b05 ACADEMY. It does not establish features or compatibility for the other b05 model.
PDF page 72
Open the source document · PDF p. 72 ↗ About this document link
Applicability and edition
Checked against the document text.
This manual identifies b05 ACADEMY. It does not establish features or compatibility for the other b05 model.
PDF page 74 · printed page 74
Open the source document · PDF p. 74 ↗ About this document link
Applicability and edition
Checked against the document text.
What input voltage, current or wattage does the manual list?
PDF page 7 · printed page 7
Open the source document · PDF p. 7 ↗ About this document link
Applicability and edition
Checked against the document text.
The manual’s power-isolation and safety instructions.
PDF page 22 · printed page 22
Open the source document · PDF p. 22 ↗ About this document link
Applicability and edition
Checked against the document text.
Switching off and unplugging before changing a needle.
PDF page 23 · printed page 23
Open the source document · PDF p. 23 ↗ About this document link
Applicability and edition
Checked against the document text.
Switching off and unplugging before changing a foot.
PDF page 6 · printed page 6
Open the source document · PDF p. 6 ↗ About this document link
Applicability and edition
Checked against the document text.
Which controller and power-cord restrictions are specified?
PDF page 17 · printed page 17
Open the source document · PDF p. 17 ↗ About this document link
Applicability and edition
Checked against the document text.
Which controller and power-cord restrictions are specified?
PDF page 74 · printed page 74
Open the source document · PDF p. 74 ↗ About this document link
Applicability and edition
Checked against the document text.
How large and heavy is it according to the technical table?
PDF page 17 · printed page 17
Open the source document · PDF p. 17 ↗ About this document link
Applicability and edition
Checked against the document text.
ACADEMY main-switch positions.
PDF page 18 · printed page 18
Open the source document · PDF p. 18 ↗ About this document link
Applicability and edition
Checked against the document text.
ACADEMY foot-control operation.
PDF page 17 · printed page 17
Open the source document · PDF p. 17 ↗ About this document link
Applicability and edition
Checked as a transcription of the page image.
How does the pedal work within the selected speed mode?
PDF page 36 · printed page 36
Open the source document · PDF p. 36 ↗ About this document link
Applicability and edition
Checked against the document text.
How do A–L categories and the colored stitch modes work?
PDF page 37 · printed page 37
Open the source document · PDF p. 37 ↗ About this document link
Applicability and edition
Checked against the document text.
Can the length of every stitch be changed?
PDF page 38 · printed page 38
Open the source document · PDF p. 38 ↗ About this document link
Applicability and edition
Checked against the document text.
How is upper tension adjusted from the stitch result?
PDF page 38 · printed page 38
Open the source document · PDF p. 38 ↗ About this document link
Applicability and edition
Checked against the document text.
What does the mechanical balance adjustment change?
PDF page 39 · printed page 39
Open the source document · PDF p. 39 ↗ About this document link
Applicability and edition
Checked against the document text.
What does the mechanical balance adjustment change?
PDF page 39 · printed page 39
Open the source document · PDF p. 39 ↗ About this document link
Applicability and edition
Checked against the document text.
How does reverse sewing and seam securing work?
PDF page 40 · printed page 40
Open the source document · PDF p. 40 ↗ About this document link
Applicability and edition
Checked against the document text.
How does reverse sewing and seam securing work?
PDF page 25 · printed page 25
Open the source document · PDF p. 25 ↗ About this document link
Applicability and edition
Checked against the document text.
What do pressure-dial changes do, and why avoid below zero?
PDF page 13 · printed page 13
Open the source document · PDF p. 13 ↗ About this document link
Applicability and edition
Checked against the document text.
What are the documented roles of the standard foot types?
PDF page 14 · printed page 14
Open the source document · PDF p. 14 ↗ About this document link
Applicability and edition
Checked against the document text.
Additional presser-foot descriptions in the ACADEMY manual.
PDF page 40 · printed page 40
Open the source document · PDF p. 40 ↗ About this document link
Applicability and edition
Checked against the document text.
How does the zigzag-foot black knob help over a thick seam?
PDF page 40 · printed page 40
Open the source document · PDF p. 40 ↗ About this document link
Applicability and edition
Checked against the document text.
How does the zigzag-foot black knob help over a thick seam?
PDF page 41 · printed page 41
Open the source document · PDF p. 41 ↗ About this document link
Applicability and edition
Checked against the document text.
How does the zigzag-foot black knob help over a thick seam?
PDF page 25 · printed page 25
Open the source document · PDF p. 25 ↗ About this document link
Applicability and edition
Checked against the document text.
Preparation for the ACADEMY finger-guard installation.
PDF page 26 · printed page 26
Open the source document · PDF p. 26 ↗ About this document link
Applicability and edition
Checked against the document text.
Completion of the ACADEMY finger-guard installation.
PDF page 18 · printed page 18
Open the source document · PDF p. 18 ↗ About this document link
Applicability and edition
Checked against the document text.
Which spool-cap, net and second-pin conditions apply?
PDF page 19 · printed page 19
Open the source document · PDF p. 19 ↗ About this document link
Applicability and edition
Checked against the document text.
Which spool-cap, net and second-pin conditions apply?
PDF page 26 · printed page 26
Open the source document · PDF p. 26 ↗ About this document link
Applicability and edition
Checked against the document text.
How is the integrated needle threader operated?
PDF page 29 · printed page 29
Open the source document · PDF p. 29 ↗ About this document link
Applicability and edition
Checked against the document text.
How is the integrated needle threader operated?
PDF page 31 · printed page 31
Open the source document · PDF p. 31 ↗ About this document link
Applicability and edition
Checked against the document text.
What changes when the bobbin winder is engaged?
PDF page 32 · printed page 32
Open the source document · PDF p. 32 ↗ About this document link
Applicability and edition
Checked against the document text.
What changes when the bobbin winder is engaged?
PDF page 33 · printed page 33
Open the source document · PDF p. 33 ↗ About this document link
Applicability and edition
Checked against the document text.
What changes when the bobbin winder is engaged?
PDF page 34 · printed page 34
Open the source document · PDF p. 34 ↗ About this document link
Applicability and edition
Checked against the document text.
How is the lower thread brought up before sewing?
PDF page 35 · printed page 35
Open the source document · PDF p. 35 ↗ About this document link
Applicability and edition
Checked against the document text.
How is the lower thread brought up before sewing?
PDF page 41 · printed page 41
Open the source document · PDF p. 41 ↗ About this document link
Applicability and edition
Checked against the document text.
How is a corner turned?
PDF page 43 · printed page 43
Open the source document · PDF p. 43 ↗ About this document link
Applicability and edition
Checked against the document text.
Which straight-stitch settings are suggested for denim or fine fabric?
PDF page 44 · printed page 44
Open the source document · PDF p. 44 ↗ About this document link
Applicability and edition
Checked against the document text.
Which zipper-foot side is used, and how is the slider passed?
PDF page 45 · printed page 45
Open the source document · PDF p. 45 ↗ About this document link
Applicability and edition
Checked against the document text.
Which zipper-foot side is used, and how is the slider passed?
PDF page 6 · printed page 6
Open the source document · PDF p. 6 ↗ About this document link
Applicability and edition
Checked against the document text.
The manual’s general safety instructions.
PDF page 44 · printed page 44
Open the source document · PDF p. 44 ↗ About this document link
Applicability and edition
Checked against the document text.
The task instructions and surrounding context.
PDF page 45 · printed page 45
Open the source document · PDF p. 45 ↗ About this document link
Applicability and edition
Checked against the document text.
Continuation of the cited instructions.
PDF page 45 · printed page 45
Open the source document · PDF p. 45 ↗ About this document link
Applicability and edition
Checked against the document text.
How does the concealed-zipper foot guide each spiral?
PDF page 46 · printed page 46
Open the source document · PDF p. 46 ↗ About this document link
Applicability and edition
Checked against the document text.
How does the concealed-zipper foot guide each spiral?
PDF page 42 · printed page 42
Open the source document · PDF p. 42 ↗ About this document link
Applicability and edition
Checked against the document text.
Which stitches are suggested for reinforced and stretchy seams?
PDF page 47 · printed page 47
Open the source document · PDF p. 47 ↗ About this document link
Applicability and edition
Checked against the document text.
Which stitches are suggested for reinforced and stretchy seams?
PDF page 48 · printed page 48
Open the source document · PDF p. 48 ↗ About this document link
Applicability and edition
Checked against the document text.
What setup is specified for darning?
PDF page 49 · printed page 49
Open the source document · PDF p. 49 ↗ About this document link
Applicability and edition
Checked against the document text.
What setup is specified for darning?
PDF page 50 · printed page 50
Open the source document · PDF p. 50 ↗ About this document link
Applicability and edition
Checked against the document text.
What is the overlock-foot guide used for?
PDF page 51 · printed page 51
Open the source document · PDF p. 51 ↗ About this document link
Applicability and edition
Checked against the document text.
How are edges and parallel seams guided?
PDF page 52 · printed page 52
Open the source document · PDF p. 52 ↗ About this document link
Applicability and edition
Checked against the document text.
How are edges and parallel seams guided?
PDF page 53 · printed page 53
Open the source document · PDF p. 53 ↗ About this document link
Applicability and edition
Checked against the document text.
What preparation is specified for the narrow hemmer?
PDF page 53 · printed page 53
Open the source document · PDF p. 53 ↗ About this document link
Applicability and edition
Checked against the document text.
The literal thread count in the cited instructions; its meaning remains unclear.
PDF page 54 · printed page 54
Open the source document · PDF p. 54 ↗ About this document link
Applicability and edition
Checked against the document text.
How is the blindstitch foot adjusted for a blind hem?
PDF page 55 · printed page 55
Open the source document · PDF p. 55 ↗ About this document link
Applicability and edition
Checked against the document text.
What basting setup does the manual suggest?
PDF page 55 · printed page 55
Open the source document · PDF p. 55 ↗ About this document link
Applicability and edition
Checked against the document text.
Clarifying wording in the cited model-specific manual passage.
PDF page 57 · printed page 57
Open the source document · PDF p. 57 ↗ About this document link
Applicability and edition
Checked against the document text.
How are gathering rows prepared for smocking?
PDF page 57 · printed page 57
Open the source document · PDF p. 57 ↗ About this document link
Applicability and edition
Checked against the document text.
How are gathering rows prepared for smocking?
PDF page 58 · printed page 58
Open the source document · PDF p. 58 ↗ About this document link
Applicability and edition
Checked against the document text.
How are gathering rows prepared for smocking?
PDF page 58 · printed page 58
Open the source document · PDF p. 58 ↗ About this document link
Applicability and edition
Checked against the document text.
Which decorative joining and shell-edge methods are described?
PDF page 59 · printed page 59
Open the source document · PDF p. 59 ↗ About this document link
Applicability and edition
Checked against the document text.
Which decorative joining and shell-edge methods are described?
PDF page 42 · printed page 42
Open the source document · PDF p. 42 ↗ About this document link
Applicability and edition
Checked against the document text.
Which decorative joining and shell-edge methods are described?
PDF page 59 · printed page 59
Open the source document · PDF p. 59 ↗ About this document link
Applicability and edition
Checked against the document text.
The cited task instructions.
PDF page 42 · printed page 42
Open the source document · PDF p. 42 ↗ About this document link
Applicability and edition
Checked against the document text.
Technical table in the cited manual.
PDF page 61 · printed page 61
Open the source document · PDF p. 61 ↗ About this document link
Applicability and edition
Checked against the document text.
What buttonhole program and length limit are documented?
PDF page 61 · printed page 61
Open the source document · PDF p. 61 ↗ About this document link
Applicability and edition
Checked as a transcription of the page image.
What buttonhole program and length limit are documented?
PDF page 61 · printed page 61
Open the source document · PDF p. 61 ↗ About this document link
Applicability and edition
Checked against the document text.
How are corded buttonholes and cutting protection handled?
PDF page 62 · printed page 62
Open the source document · PDF p. 62 ↗ About this document link
Applicability and edition
Checked against the document text.
How are corded buttonholes and cutting protection handled?
PDF page 64 · printed page 64
Open the source document · PDF p. 64 ↗ About this document link
Applicability and edition
Checked against the document text.
How are corded buttonholes and cutting protection handled?
PDF page 64 · printed page 64
Open the source document · PDF p. 64 ↗ About this document link
Applicability and edition
Checked against the document text.
Clarifying wording in the cited model-specific manual passage.
PDF page 64 · printed page 64
Open the source document · PDF p. 64 ↗ About this document link
Applicability and edition
Checked against the document text.
How is a button sewn on without striking it?
PDF page 65 · printed page 65
Open the source document · PDF p. 65 ↗ About this document link
Applicability and edition
Checked against the document text.
How does the manual describe appliqué stitching and turning?
PDF page 65 · printed page 65
Open the source document · PDF p. 65 ↗ About this document link
Applicability and edition
Checked against the document text.
What additional equipment and control matter for free-motion quilting?
PDF page 66 · printed page 66
Open the source document · PDF p. 66 ↗ About this document link
Applicability and edition
Checked against the document text.
What additional equipment and control matter for free-motion quilting?
PDF page 66 · printed page 66
Open the source document · PDF p. 66 ↗ About this document link
Applicability and edition
Checked against the document text.
Read the complete free-motion quilting page, including its equipment requirements.
PDF page 48 · printed page 48
Open the source document · PDF p. 48 ↗ About this document link
Applicability and edition
Checked against the document text.
Feed-dog instructions in the separate darning chapter.
PDF page 66 · printed page 66
Open the source document · PDF p. 66 ↗ About this document link
Applicability and edition
Checked against the document text.
What seam setup is given for patchwork?
PDF page 67 · printed page 67
Open the source document · PDF p. 67 ↗ About this document link
Applicability and edition
Checked against the document text.
What seam setup is given for patchwork?
PDF page 68 · printed page 68
Open the source document · PDF p. 68 ↗ About this document link
Applicability and edition
Checked against the document text.
What power and reassembly precautions surround routine cleaning?
PDF page 69 · printed page 69
Open the source document · PDF p. 69 ↗ About this document link
Applicability and edition
Checked against the document text.
What power and reassembly precautions surround routine cleaning?
PDF page 69 · printed page 69
Open the source document · PDF p. 69 ↗ About this document link
Applicability and edition
Checked against the document text.
The stated order for bobbin-area cleaning; see the recorded step-order uncertainty.
PDF page 71 · printed page 71
Open the source document · PDF p. 71 ↗ About this document link
Applicability and edition
Checked against the document text.
The manual’s oiling instructions.
PDF page 72 · printed page 72
Open the source document · PDF p. 72 ↗ About this document link
Applicability and edition
Checked against the document text.
Which stitch faults can be checked, and which go to a dealer?
PDF page 73 · printed page 73
Open the source document · PDF p. 73 ↗ About this document link
Applicability and edition
Checked against the document text.
Which stitch faults can be checked, and which go to a dealer?
PDF page 73 · printed page 73
Open the source document · PDF p. 73 ↗ About this document link
Applicability and edition
Checked against the document text.
What checks are listed for no operation or a thread jam?
PDF page 72 · printed page 72
Open the source document · PDF p. 72 ↗ About this document link
Applicability and edition
Checked against the document text.
What checks are listed for no operation or a thread jam?
PDF page 72 · printed page 72
Open the source document · PDF p. 72 ↗ About this document link
Applicability and edition
Checked against the document text.
Clarifying wording in the cited model-specific manual passage.
Editorial responsibility & corrections
Alex Shick · Founder and editor. Corrections managed by Alex Shick.
This bernette b05 ACADEMY guide is based on documents, with AI assistance to organize the information. We have not tested or repaired the machine.
Check the document edition with each answer. A source review date is not a machine inspection date or a promise that the manual is the latest edition.
Contact the SewIndex team or report a correction ↗
The correction address has been tested and its monitoring confirmed. We cannot promise a response or accept every suggested change.
Report an error with the model, document and page · About SewIndex and our method
About this information
Answers come from the documents named on this page. They describe those editions, and may not cover later changes to the machine or manual.