Which needle system does the manual specify?
Before you use this answer
Use the exact manual and its original conditions; this designation does not establish every needle style or size.
Documents and page references →Embroidery reference
bernette b70 DECO
Needles, bobbins, feet and other details for this model. Check the requirements before choosing parts.
Applies to every answer on this page
- Evidence scope; separate conditions not recorded: Exact retained manual for this accepted physical machine only; sibling and adjacent-table wording are excluded.
Conditions specific to one answer are shown with that answer.
Before choosing a part
Compatibility essentials
Start with these documented details. Read the requirements with each answer before choosing a needle, bobbin or foot.
- Foot attachment
Hopper Embroidery Foot JX attaches to the presser-foot bar with its spring over the needle-clamp screw and is secured by the screw.
Requirements and sources →Embroidery Foot JL attaches from the back to the presser-foot bar and is secured by the screw.
Requirements and sources →- Needle system / designation
130/705H
Requirements and sources →
Not yet confirmed here: Manufacturer accessory group, Presser-foot shank type, Foot holder / mount, Foot interface / generation, Bobbin type / class, Bobbin material, Bobbin diameter, Bobbin height, Hook type, Needle sizes by fabric and use, Maximum stitch / zigzag width, Feed system, Bobbin loading direction. What is still to confirm →
Model & names
- Model
- bernette b70 DECO
Other names, regional versions and related models have not been confirmed here. A shared manual, product line or accessory group does not identify the machine's family.
What do you need help with?
Which way does the bobbin unwind?
Before you use this answer
Follow the full illustrated threading route. Direction alone does not identify bobbin class, dimensions or replacement fit.
Documents and page references →How do the JX and JL embroidery feet attach?
Before you use this answer
Keep the two documented attachment procedures distinct and read their full conditions. They do not establish universal foot interchangeability.
Documents and page references →What maximum embroidery speed is documented?
Before you use this answer
This is the accepted embroidery-speed specification with its original source scope and conditions; it is not a sewing-speed or stitch-width claim.
Documents and page references →How does the needle go in?
Before you use this answer
Read the complete illustrated procedure and original power and positioning conditions before changing the needle.
Documents and page references →Manuals, parts books & more
Manuals & manufacturer documents
Available documents & sources
- Operating manual
- bernette b70 DECO instruction manual
Publisher links below distinguish a matched file from a listing.
Choose the document for your task: an instruction manual, service manual, parts list and accessory guide answer different questions.
About this document & page references →
Instructionbernette b70 DECO instruction manual
Read the source document ↗
We checked that this file matched the source used here on 2026-10-13. The publisher may later replace its file.
Needle, bobbin & presser-foot details
Read the model-specific requirements with each answer before choosing parts.
Needle
System
130/705H
Sources and pages
Needle insertion
Insert fully with the flat side to the back and tighten the screw.
Sources and pages
Bobbin
Insertion path
Open the cover by pushing the handle right; insert an evenly wound bobbin, pull the thread into slit 1, and press the bobbin gently.
Sources and pages
Bobbin insertion
Insert with the thread wound counterclockwise.
Sources and pages
Class or system
Not yet verified- Not yet verified: The reviewed page does not establish a bobbin class, part number, dimensions or unrestricted substitute.
Presser foot
Hopper embroidery foot
Hopper Embroidery Foot JX attaches to the presser-foot bar with its spring over the needle-clamp screw and is secured by the screw.
Sources and pages
Embroidery foot
Embroidery Foot JL attaches from the back to the presser-foot bar and is secured by the screw.
Sources and pages
Mount or fit
Not yet verified- Not yet verified: These exact supplied-foot procedures do not establish a standardized shank class or third-party fit.
Specifications & documented facts
Specifications apply to the named model and document edition. Read any setup, fabric or safety requirements with the answer.
Performance & stitch capabilities
Maximum embroidery speed
850 stitches per minute
Sources and pages
Dimensions without embroidery module
509 × 200 × 315 mm (W × D × H)
Sources and pages
Dimensions with embroidery module
710 × 475 × 315 mm (W × D × H)
Sources and pages
Weight
Machine 8.14 kg; embroidery module 3.65 kg
Sources and pages
Energy consumption
90 W
Sources and pages
Input voltage
100–240 V
Sources and pages
Care, setup & service references
Use the full source procedure and its safety precautions. A short referenced answer is not a substitute for service documentation or qualified electrical/mechanical repair.
Service-manual availability and service-only procedures remain unestablished unless separately cataloged and reviewed.
Coverage and source-review limits
Model-specific documents support selected answers. Their requirements and unanswered questions remain; substitutions and third-party compatibility have not been confirmed.
Coverage and remaining questions
- Operating manual
- Listed below; check the edition and available link.
- Exact OEM part application
- No model-specific part application is listed here.
Still to confirm
An unanswered question does not mean a part is incompatible. We have not confirmed enough information to recommend it.
Presser foot — Mount or fit: Not established Full recorded limit & conditions →
Bobbin — Class or system: Not established Full recorded limit & conditions →
Other names, regional versions, production history, further specifications and documents are not fully covered here. Their absence is not a “none exist” finding.
Next evidence targets
- Bobbin class, dimensions and replacement fit remain unestablished.
- The JX and JL attachment procedures do not establish universal foot fit or shank class.
- Additional OEM repair and parts documents require exact model and edition admission.
These are research questions, not claims that the missing relationship exists.
Sources and page references
Each answer links to its exact evidence passage below. Open a reference to see the document and page. These links identify the source; they do not include the full manual or its diagrams. Document access is consolidated in the OEM library above.
Document and page references (5)
bernette b70 DECO instruction manual
Published by bernette
Exact retained manual for this accepted physical machine only; sibling and adjacent-table wording are excluded.
Checked against the document text.
Document and available links →About this document →PDF page 29
Open the source document · PDF p. 29 ↗ About this document link
PDF page 29
Open the source document · PDF p. 29 ↗ About this document link
PDF page 36
Open the source document · PDF p. 36 ↗ About this document link
PDF page 76
Open the source document · PDF p. 76 ↗ About this document link
PDF page 82
Open the source document · PDF p. 82 ↗ About this document link
Editorial responsibility & corrections
Alex Shick · Founder and editor. Corrections managed by Alex Shick.
This bernette b70 DECO guide is based on documents, with AI assistance to organize the information. We have not tested or repaired the machine.
Check the document edition with each answer. A source review date is not a machine inspection date or a promise that the manual is the latest edition.
Contact the SewIndex team or report a correction ↗
The correction address has been tested and its monitoring confirmed. We cannot promise a response or accept every suggested change.
Report an error with the model, document and page · About SewIndex and our method
About this information
Answers come from the documents named on this page. They describe those editions, and may not cover later changes to the machine or manual.