Machine reference
Needles, bobbins, feet and other details for this model. Check the requirements before choosing parts.
Before choosing a part
Start with these documented details. Read the requirements with each answer before choosing a needle, bobbin or foot.
Use J-marked plastic bobbins for the horizontal hook; other bobbins, including pre-wound paper bobbins, may cause stitching problems or holder damage.
Requirements and sources →Fine: Blue tip #9/65–11/75; medium #11/75–14/90; heavy #14/90–16/100.
Requirements and sources →Not yet confirmed here: Manufacturer accessory group, Presser-foot shank type, Foot attachment, Foot holder / mount, Foot interface / generation, Bobbin type / class, Bobbin diameter, Bobbin height, Needle system / designation, Maximum stitch / zigzag width, Feed system, Bobbin loading direction. What is still to confirm →
Other names, regional versions and related models have not been confirmed here. A shared manual, product line or accessory group does not identify the machine's family.
Use only this exact retained model/manual edition. Read all original safety, setup and fabric conditions with the cited answer. These instructions do not establish standardized shank or holder fit, a generic bobbin class/substitute, measured dimensions or a formal needle system.
Documents and page references →Use only this exact retained model/manual edition. Read all original safety, setup and fabric conditions with the cited answer. These instructions do not establish standardized shank or holder fit, a generic bobbin class/substitute, measured dimensions or a formal needle system.
Documents and page references →Use only this exact retained model/manual edition. Read all original safety, setup and fabric conditions with the cited answer. These instructions do not establish standardized shank or holder fit, a generic bobbin class/substitute, measured dimensions or a formal needle system.
Documents and page references →Use only this exact retained model/manual edition. Read all original safety, setup and fabric conditions with the cited answer. These instructions do not establish standardized shank or holder fit, a generic bobbin class/substitute, measured dimensions or a formal needle system.
Documents and page references →Use only this exact retained model/manual edition. Read all original safety, setup and fabric conditions with the cited answer. These instructions do not establish standardized shank or holder fit, a generic bobbin class/substitute, measured dimensions or a formal needle system.
Documents and page references →Manuals, parts books & more
Publisher links below distinguish a matched file from a listing.
Choose the document for your task: an instruction manual, service manual, parts list and accessory guide answer different questions.
About this document & page references →
Instruction manualCited retained OEM instruction manual: Page references identify this edition. A matching current public download has not been established. The original is retained privately and is not hosted by SewIndex.
Read the model-specific requirements with each answer before choosing parts.
Fine: Blue tip #9/65–11/75; medium #11/75–14/90; heavy #14/90–16/100.
Insert flat side to rear, push to stopper pin and tighten clamp firmly with a screwdriver.
Use J-marked plastic bobbins for the horizontal hook; other bobbins, including pre-wound paper bobbins, may cause stitching problems or holder damage.
Insert with thread running counterclockwise; hold the bobbin, thread the front notch and guide paths 1 then 2, confirming exit at the side notch, then replace the hook cover.
Specifications apply to the named model and document edition. Read any setup, fabric or safety requirements with the answer.
Clean the hook area at least once a month.
Remove needle plate, needle, presser foot, bobbin and holder; brush holder, feed dog and auto thread cutter, wipe the hook race, and replace holder with knob next to stopper; reassemble all removed components.
Use the full source procedure and its safety precautions. A short referenced answer is not a substitute for service documentation or qualified electrical/mechanical repair.
Service-manual availability and service-only procedures remain unestablished unless separately cataloged and reviewed.
Answers use the standard Skyline S3, S5, S6 and S9 English manuals with model-specific safety requirements. Bobbin class, formal needle system and standard foot compatibility remain unconfirmed. Unreadable S5 characters were excluded. The original PDFs are not hosted here.
An unanswered question does not mean a part is incompatible. We have not confirmed enough information to recommend it.
Bobbin — Class: Not established Full recorded limit & conditions →
Needle — System: Not established Full recorded limit & conditions →
Presser foot — Standardized fit: Not established Full recorded limit & conditions →
Other names, regional versions, production history, further specifications and documents are not fully covered here. Their absence is not a “none exist” finding.
Each answer links to its exact evidence passage below. Open a reference to see the document and page. These links identify the source; they do not include the full manual or its diagrams. Document access is consolidated in the OEM library above.
Published by Janome · 863-800-203(ENG) · en
Document and available links →About this document →PDF page 16 · printed page 14
Checked as a transcription of the page image.
Exact standard janome:skyline-s3 retained instruction-manual procedure, joined by the reviewed OEM product/manual bridge. Preserve all conditions; no sibling or accessory-catalog technical transfer.
PDF page 18 · printed page 16
Checked as a transcription of the page image.
Exact standard janome:skyline-s3 retained instruction-manual procedure, joined by the reviewed OEM product/manual bridge. Preserve all conditions; no sibling or accessory-catalog technical transfer.
PDF page 15 · printed page 13
Checked as a transcription of the page image.
Exact standard janome:skyline-s3 retained instruction-manual procedure, joined by the reviewed OEM product/manual bridge. Preserve all conditions; no sibling or accessory-catalog technical transfer.
PDF page 75 · printed page 73
Checked as a transcription of the page image.
Exact standard janome:skyline-s3 retained instruction-manual procedure, joined by the reviewed OEM product/manual bridge. Preserve all conditions; no sibling or accessory-catalog technical transfer.
PDF page 15 · printed page 13
Checked as a transcription of the page image.
Exact standard janome:skyline-s3 retained instruction-manual procedure, joined by the reviewed OEM product/manual bridge. Preserve all conditions; no sibling or accessory-catalog technical transfer.
PDF page 80
Checked against the document text.
Exact edition marker; physical model applicability comes only from the separately replayed frozen OEM product/manual bridge and accepted entity, not this identifier.
Alex Shick · Founder and editor. Corrections managed by Alex Shick.
This Janome SKYLINE S3 guide is based on documents, with AI assistance to organize the information. We have not tested or repaired the machine.
Check the document edition with each answer. A source review date is not a machine inspection date or a promise that the manual is the latest edition.
Contact the SewIndex team or report a correction ↗
The correction address has been tested and its monitoring confirmed. We cannot promise a response or accept every suggested change.
Report an error with the model, document and page · About SewIndex and our method
Answers come from the documents named on this page. They describe those editions, and may not cover later changes to the machine or manual.