Which needle types does this manual name?
Before you use this answer
HA X 1 SP is the separately named knit option. No other model or retail SKU fitment transfers.
Documents and page references →Owner setup reference
JUKI HZL-F400
Needles, bobbins, feet and other details for this model. Check the requirements before choosing parts.
Before choosing a part
Compatibility essentials
Start with these documented details. Read the requirements with each answer before choosing a needle, bobbin or foot.
- Manufacturer accessory group
Exceed(F) Series
Requirements and sources →- Foot attachment
Raise the needle and presser foot, then press the presser-foot release button to remove the foot.
Requirements and sources →Align the foot pin with the holder groove, then lower the holder with the lifting lever.
Requirements and sources →- Needle system / designation
HA X 1 (130/705H)
Requirements and sources →- Bobbin part / pack reference
001141000000
Requirements and sources →
Not yet confirmed here: Presser-foot shank type, Foot holder / mount, Foot interface / generation, Bobbin type / class, Bobbin material, Bobbin diameter, Bobbin height, Hook type, Needle sizes by fabric and use, Maximum stitch / zigzag width, Feed system, Bobbin loading direction. What is still to confirm →
Accessory groups refer to the named catalog and category. A shared group or snap-on attachment does not mean every accessory fits.
Model & names
- Model
- JUKI HZL-F400
Other names, regional versions and related models have not been confirmed here. A shared manual, product line or accessory group does not identify the machine's family.
What do you need help with?
Which way should the designated bobbin turn?
Before you use this answer
Use only the designated bobbin and read the power-off conditions. Bobbin class, OEM SKU and substitutes remain unknown.
Documents and page references →How is the presser foot released and attached?
Before you use this answer
Read the power-off and appropriate marked-foot conditions. Release-button instructions do not establish a standardized mount or retail item fit.
Documents and page references →How is the needle oriented and seated?
Before you use this answer
Read the power-off, straightness and tightening conditions with these bounded answers; they are not the complete removal/attachment procedure.
Documents and page references →Which standard presser foot is listed for this model?
Before you use this answer
Keep the exact model → series → item and numbered feature joins. Listing does not establish supplied equipment, adapters or retail fit.
Documents and page references →Which overcasting foot is listed, and which stitches must not use it?
Before you use this answer
Read the full item exclusion and illustration before choosing stitches. The different HZL-L foot is excluded; there is no arbitrary aftermarket application.
Documents and page references →More questions (2)
Which OEM accessory series does this exact model belong to?
Before you use this answer
Use the July 2026 named-model row and exact series column. It does not establish an interchangeable shank or every accessory.
Documents and page references →Which bobbin item does the OEM accessory catalog list for this model?
Before you use this answer
Keep every leading zero in the item number and the exact model/series/item row. This is not a generic bobbin class, dimensional envelope or retail-unit application.
Documents and page references →Manuals, parts books & more
Manuals & manufacturer documents
Available documents & sources
- Accessory compatibility guide
- Home Sewing Machine Accessories · July2026Edition
- Operating manual
- HZL-F series instruction manual · Printed document code40122553 / code000312; no inferred publication date or regional equivalence.
Publisher links below distinguish a matched file from a listing.
Choose the document for your task: an instruction manual, service manual, parts list and accessory guide answer different questions.
About this document & page references →
InstructionHZL-F series instruction manual
Edition and models
Edition: Printed document code40122553 / code000312; no inferred publication date or regional equivalence.
Models referenced here: JUKI HZL-F400
Read the source document ↗
We checked that this file matched the source used here on 2026-10-05. The publisher may later replace its file.
About this document & page references →
Accessory compatibilityHome Sewing Machine Accessories
Read the source document ↗
We checked that this file matched the source used here on 2026-10-10. The publisher may later replace its file.
Needle, bobbin & presser-foot details
Read the model-specific requirements with each answer before choosing parts.
Needle
System
- This shared manual names F300 and F400 separately on PDF page 3 (printed page 1). Use the instructions for your exact model; do not transfer another model’s features or included accessories. The manual names this spare-needle type and separately names HA X 1 SP for knits; this does not confirm other models or a seller’s replacement product.
HA X 1 (130/705H)
Knit option
- This shared manual names F300 and F400 separately on PDF page 3 (printed page 1). Use the instructions for your exact model; do not transfer another model’s features or included accessories. For knits only; this does not confirm other needle types or a seller’s replacement product.
HA X 1 SP
Needle insertion
- This shared manual names F300 and F400 separately on PDF page 3 (printed page 1). Use the instructions for your exact model; do not transfer another model’s features or included accessories. Turn OFF power before changing the needle; check straightness, insert correctly and securely tighten the needle setscrew. Read the complete illustrated needle removal and fitting instructions.
Insert with the flat part facing away from the operator.
Insertion depth
- This shared manual names F300 and F400 separately on PDF page 3 (printed page 1). Use the instructions for your exact model; do not transfer another model’s features or included accessories. Turn OFF power before changing the needle; check straightness, insert correctly and securely tighten the needle setscrew. Read the complete illustrated needle removal and fitting instructions.
Insert fully until the needle touches the stopper pin.
Bobbin
Insertion direction
- This shared manual names F300 and F400 separately on PDF page 3 (printed page 1). Use the instructions for your exact model; do not transfer another model’s features or included accessories. Turn OFF the power switch before taking the bobbin out or putting it into the case. Use only the designated bobbin. Read the complete illustrated threading procedure; these directions do not identify bobbin class or suitable substitutes.
Place the bobbin so the thread winds counterclockwise.
Orientation check
- This shared manual names F300 and F400 separately on PDF page 3 (printed page 1). Use the instructions for your exact model; do not transfer another model’s features or included accessories. Turn OFF the power switch before taking the bobbin out or putting it into the case. Use only the designated bobbin. Read the complete illustrated threading procedure; these directions do not identify bobbin class or suitable substitutes.
When pulling bobbin thread, the bobbin should rotate counterclockwise; turn it upside down if it rotates clockwise.
Class or part
Not yet verified- Use the designated bobbin. These passages do not identify its standard class, dimensions, manufacturer part number or suitable substitutes.
Bobbin item · July 2026 OEM catalog
- Exact named model → Exceed(F) column → this specific item cell in July2026 original; not all-item family compatibility or machine equivalence.
- This is a listing in the cited catalog. It does not confirm what is installed or supplied with your machine, current stock, or whether a seller’s offered product fits. Follow your exact model’s complete manual and safety instructions for fitting or operation; no fitting procedure is provided here.
- No generic shank, holder/adapter, bobbin class/profile/substitution, hook or needle equivalence or maximum-width inference; each axis remains separate.
- Preserve all leading zeroes in exact OEM number001141000000; mergedUX/HZL-DX/Exceed(F)/HZL-Gcell, not separateHZL-L40177365.
- Bobbin type differs depending on machine model; use the bobbin designed for your machine. No bobbinclass/material/dimension/substitution or generalinterchangeability follows.
001141000000
Presser foot
Removal
- This shared manual names F300 and F400 separately on PDF page 3 (printed page 1). Use the instructions for your exact model; do not transfer another model’s features or included accessories. Turn OFF the power switch before replacing the presser foot. Raise the needle and presser foot before release. Use the appropriate marked foot for the stitch pattern; these instructions do not establish a standard attachment interface or shank dimensions, or confirm replacement-foot fit.
Raise the needle and presser foot, then press the presser-foot release button to remove the foot.
Attachment
- This shared manual names F300 and F400 separately on PDF page 3 (printed page 1). Use the instructions for your exact model; do not transfer another model’s features or included accessories. Turn OFF the power switch before replacing the presser foot. Raise the needle and presser foot before release. Use the appropriate marked foot for the stitch pattern; these instructions do not establish a standard attachment interface or shank dimensions, or confirm replacement-foot fit.
Align the foot pin with the holder groove, then lower the holder with the lifting lever.
Mount or fit
Not yet verified- Shank dimensions and suitable replacement adapters or feet have not been confirmed from these release-button and pin instructions.
OEM accessory series · July 2026 catalog
- Exact named model → Exceed(F) column → this specific item cell in July2026 original; not all-item family compatibility or machine equivalence.
- This is a listing in the cited catalog. It does not confirm what is installed or supplied with your machine, current stock, or whether a seller’s offered product fits. Follow your exact model’s complete manual and safety instructions for fitting or operation; no fitting procedure is provided here.
- No generic shank, holder/adapter, bobbin class/profile/substitution, hook or needle equivalence or maximum-width inference; each axis remains separate.
- Catalog application scheme only; source membership does not imply every accessory fits.
Exceed(F) Series
Standard presser foot · July 2026 OEM catalog
- Exact named model → Exceed(F) column → this specific item cell in July2026 original; not all-item family compatibility or machine equivalence.
- This is a listing in the cited catalog. It does not confirm what is installed or supplied with your machine, current stock, or whether a seller’s offered product fits. Follow your exact model’s complete manual and safety instructions for fitting or operation; no fitting procedure is provided here.
- No generic shank, holder/adapter, bobbin class/profile/substitution, hook or needle equivalence or maximum-width inference; each axis remains separate.
- ExactStandardPresserFoot40057923 mergedHZL-DX/Exceed(F)/HZL-Gcell only; UXSmartFeedmatte/glossyfootnotes and itemnumbers excluded.
40057923
Overcasting foot · July 2026 OEM catalog
- Exact named model → Exceed(F) column → this specific item cell in July2026 original; not all-item family compatibility or machine equivalence.
- This is a listing in the cited catalog. It does not confirm what is installed or supplied with your machine, current stock, or whether a seller’s offered product fits. Follow your exact model’s complete manual and safety instructions for fitting or operation; no fitting procedure is provided here.
- No generic shank, holder/adapter, bobbin class/profile/substitution, hook or needle equivalence or maximum-width inference; each axis remains separate.
- ExactOvercastingPresserFoot(OveredgeFoot)40080960 mergedUX/HZL-DX/Exceed(F)cell only; notHZL-G/Litemnumbers.
- This foot CANNOT be used for zigzag stitches or overcasting by 3-point zigzag (original physical4). StandardFootzigzag wording doesnot override this restriction.
40080960
Specifications & documented facts
Specifications apply to the named model and document edition. Read any setup, fabric or safety requirements with the answer.
Owner features
Commercial fitment
Not yet verified- A needle reference for this model does not confirm another model or a seller’s replacement product; check the exact product separately.
Part numbers & accessories
These are manufacturer part references. A drawing or matching number alone does not confirm that a replacement from a seller fits. Check the model-specific listing and restrictions.
Manufacturer catalog references are listed below. Replacement compatibility has not been checked.
Items listed for this model in the OEM accessory catalog
These conditional catalog answers join the named model to its catalog group, then to the exact item row. Keep the edition, item and pack limits. They do not establish a generic bobbin class, standardized mount, replacement procedure or a seller’s offered-unit fit.
Standard presser foot · July 2026 OEM catalog
- Exact named model → Exceed(F) column → this specific item cell in July2026 original; not all-item family compatibility or machine equivalence.
- This is a listing in the cited catalog. It does not confirm what is installed or supplied with your machine, current stock, or whether a seller’s offered product fits. Follow your exact model’s complete manual and safety instructions for fitting or operation; no fitting procedure is provided here.
- No generic shank, holder/adapter, bobbin class/profile/substitution, hook or needle equivalence or maximum-width inference; each axis remains separate.
- ExactStandardPresserFoot40057923 mergedHZL-DX/Exceed(F)/HZL-Gcell only; UXSmartFeedmatte/glossyfootnotes and itemnumbers excluded.
40057923
Full catalog answer and all conditions →
HZL-F series instruction manual · Printed document code40122553 / code000312; no inferred publication date or regional equivalence. · PDF page 3 · printed page 1 · Home Sewing Machine Accessories · July2026Edition · PDF page 3 · printed page 3 · Home Sewing Machine Accessories · July2026Edition · PDF page 4 · printed page 4 · Home Sewing Machine Accessories · July2026Edition · PDF page 36 · printed page 36
Overcasting foot · July 2026 OEM catalog
- Exact named model → Exceed(F) column → this specific item cell in July2026 original; not all-item family compatibility or machine equivalence.
- This is a listing in the cited catalog. It does not confirm what is installed or supplied with your machine, current stock, or whether a seller’s offered product fits. Follow your exact model’s complete manual and safety instructions for fitting or operation; no fitting procedure is provided here.
- No generic shank, holder/adapter, bobbin class/profile/substitution, hook or needle equivalence or maximum-width inference; each axis remains separate.
- ExactOvercastingPresserFoot(OveredgeFoot)40080960 mergedUX/HZL-DX/Exceed(F)cell only; notHZL-G/Litemnumbers.
- This foot CANNOT be used for zigzag stitches or overcasting by 3-point zigzag (original physical4). StandardFootzigzag wording doesnot override this restriction.
40080960
Full catalog answer and all conditions →
HZL-F series instruction manual · Printed document code40122553 / code000312; no inferred publication date or regional equivalence. · PDF page 3 · printed page 1 · Home Sewing Machine Accessories · July2026Edition · PDF page 3 · printed page 3 · Home Sewing Machine Accessories · July2026Edition · PDF page 4 · printed page 4 · Home Sewing Machine Accessories · July2026Edition · PDF page 36 · printed page 36
Bobbin item · July 2026 OEM catalog
- Exact named model → Exceed(F) column → this specific item cell in July2026 original; not all-item family compatibility or machine equivalence.
- This is a listing in the cited catalog. It does not confirm what is installed or supplied with your machine, current stock, or whether a seller’s offered product fits. Follow your exact model’s complete manual and safety instructions for fitting or operation; no fitting procedure is provided here.
- No generic shank, holder/adapter, bobbin class/profile/substitution, hook or needle equivalence or maximum-width inference; each axis remains separate.
- Preserve all leading zeroes in exact OEM number001141000000; mergedUX/HZL-DX/Exceed(F)/HZL-Gcell, not separateHZL-L40177365.
- Bobbin type differs depending on machine model; use the bobbin designed for your machine. No bobbinclass/material/dimension/substitution or generalinterchangeability follows.
001141000000
Full catalog answer and all conditions →
HZL-F series instruction manual · Printed document code40122553 / code000312; no inferred publication date or regional equivalence. · PDF page 3 · printed page 1 · Home Sewing Machine Accessories · July2026Edition · PDF page 3 · printed page 3 · Home Sewing Machine Accessories · July2026Edition · PDF page 33 · printed page 33
Check the exact model and part before ordering. Missing information does not mean a part is incompatible.
Care, setup & service references
Use the full source procedure and its safety precautions. A short referenced answer is not a substitute for service documentation or qualified electrical/mechanical repair.
Service-manual availability and service-only procedures remain unestablished unless separately cataloged and reviewed.
Coverage and source-review limits
Eight answers use one instruction-manual edition. They are not complete procedures and do not establish features on related models or replacement-product compatibility.
Coverage and remaining questions
- Operating manual
- Listed below; check the edition and available link.
- Exact OEM part application
- No model-specific part application is listed here.
Still to confirm
An unanswered question does not mean a part is incompatible. We have not confirmed enough information to recommend it.
Presser foot — Mount or fit: Not established Full recorded limit & conditions →
Bobbin — Class or part: Not established Full recorded limit & conditions →
Ownership — Commercial fitment: Not established Full recorded limit & conditions →
Other names, regional versions, production history, further specifications and documents are not fully covered here. Their absence is not a “none exist” finding.
Next evidence targets
- Exact bobbin class and OEM part remain unestablished.
- Standardized presser-foot mount and item fit remain unestablished.
- Machine region, lifecycle and model-exclusive features remain unestablished.
These are research questions, not claims that the missing relationship exists.
Sources and page references
Each answer links to its exact evidence passage below. Open a reference to see the document and page. These links identify the source; they do not include the full manual or its diagrams. Document access is consolidated in the OEM library above.
Document and page references (15)
HZL-F series instruction manual
Published by JUKI · Printed document code40122553 / code000312; no inferred publication date or regional equivalence. · English
For F300 and F400 in this instruction-manual edition. Their document applications were checked separately. The safety heading spells the third model “HZL-600”; that wording does not establish another model name or confirm replacement-controller or accessory fit.
Checked against the document text.
Document and available links →About this document →PDF page 3 · printed page 1
Open the source document · PDF p. 3 ↗ About this document link
PDF page 16 · printed page 14
Open the source document · PDF p. 16 ↗ About this document link
PDF page 16 · printed page 14
Open the source document · PDF p. 16 ↗ About this document link
PDF page 18 · printed page 16
Open the source document · PDF p. 18 ↗ About this document link
PDF page 18 · printed page 16
Open the source document · PDF p. 18 ↗ About this document link
PDF page 20 · printed page 18
Open the source document · PDF p. 20 ↗ About this document link
PDF page 21 · printed page 19
Open the source document · PDF p. 21 ↗ About this document link
PDF page 26 · printed page 24
Open the source document · PDF p. 26 ↗ About this document link
PDF page 26 · printed page 24
Open the source document · PDF p. 26 ↗ About this document link
PDF page 26 · printed page 24
Open the source document · PDF p. 26 ↗ About this document link
PDF page 26 · printed page 24
Open the source document · PDF p. 26 ↗ About this document link
Home Sewing Machine Accessories
Published by JUKI · July2026Edition · English
For HZL-F300 and HZL-F400 as separate models. In the July 2026 catalog, read the named-model row on PDF page 3, the Exceed(F) column, and the specific accessory cell together. The complete table and page layout were checked. This does not make the machines equivalent, confirm every accessory in that column or approve a seller’s replacement product.
Checked against the document text.
Document and available links →About this document →PDF page 3 · printed page 3
Open the source document · PDF p. 3 ↗ About this document link
PDF page 4 · printed page 4
Open the source document · PDF p. 4 ↗ About this document link
PDF page 33 · printed page 33
Open the source document · PDF p. 33 ↗ About this document link
PDF page 36 · printed page 36
Open the source document · PDF p. 36 ↗ About this document link
Editorial responsibility & corrections
Alex Shick · Founder and editor. Corrections managed by Alex Shick.
This JUKI HZL-F400 guide is based on documents, with AI assistance to organize the information. We have not tested or repaired the machine.
Check the document edition with each answer. A source review date is not a machine inspection date or a promise that the manual is the latest edition.
Contact the SewIndex team or report a correction ↗
The correction address has been tested and its monitoring confirmed. We cannot promise a response or accept every suggested change.
Report an error with the model, document and page · About SewIndex and our method
About this information
Answers come from the documents named on this page. They describe those editions, and may not cover later changes to the machine or manual.