Sewing-machine answers from manuals and manufacturer documents. About the evidence
SewIndexThe Sewing Machine Index

Domestic sewing reference

Pfaff select 2.2

12 cited answers2 documentsCoverage limits

Needles, bobbins, feet and other details for this model. Check the requirements before choosing parts.

Read instruction manual ↗Find an answer ↓

Before choosing a part

Compatibility essentials

Start with these documented details. Read the requirements with each answer before choosing a needle, bobbin or foot.

Manufacturer accessory group

The 2026 PFAFF accessory catalog lists select 2.2 in PFAFF accessory group C.

Requirements and sources →
Foot attachment

Power off, needle highest: press foot front up/back down simultaneously. Position under holder, lower lifter to engage pins; raise lifter to check engagement.

Requirements and sources →
Needle system / designation

The retained troubleshooting table recommends needle system 130/705 H for the wrong-needle cause of skipped stitches.

Requirements and sources →
Feed system

The retained standard-accessory table lists select 2.2 with standard, blindhem/overlock and zipper feet without the IDT system; its IDT parts-diagram label names 4.2/3.2.

Requirements and sources →

Not yet confirmed here: Presser-foot shank type, Foot holder / mount, Foot interface / generation, Bobbin type / class, Bobbin material, Bobbin diameter, Bobbin height, Hook type, Needle sizes by fabric and use, Maximum stitch / zigzag width, Bobbin loading direction. What is still to confirm →

Accessory groups refer to the named catalog and category. A shared group or snap-on attachment does not mean every accessory fits.

Model & names

Model
Pfaff select 2.2

Other names, regional versions and related models have not been confirmed here. A shared manual, product line or accessory group does not identify the machine's family.

What do you need help with?

How do I change and orient the needle safely?

Needle replacement →
Before you use this answer

Read the recorded source conditions and complete cited document with this answer. Separate identity, edition, compatibility and retail fitment limits remain in force.

Documents and page references →

How do I load the bobbin or case and check its thread direction?

Insertion →
Before you use this answer

Read the recorded source conditions and complete cited document with this answer. Separate identity, edition, compatibility and retail fitment limits remain in force.

Documents and page references →

Which starting upper-thread tension settings does this edition give?

Needle thread tension →
Before you use this answer

Read the recorded source conditions and complete cited document with this answer. Separate identity, edition, compatibility and retail fitment limits remain in force.

Documents and page references →

When and where does this exact select edition call for hook oil?

Hook oiling →
Before you use this answer

Read the recorded source conditions and complete cited document with this answer. Separate identity, edition, compatibility and retail fitment limits remain in force.

Documents and page references →
More questions (6)

What should I check after replacing the needle plate?

Plate replacement check →
Before you use this answer

Read the recorded source conditions and complete cited document with this answer. Separate identity, edition, compatibility and retail fitment limits remain in force.

Documents and page references →

Which blue-bobbin ten-pack does the 2026 OEM catalog list for this model?

Blue bobbins · OEM ten-pack →
Before you use this answer

Read the exact model-to-group and group-to-item evidence. A ten-pack reference does not establish an individual bobbin class, dimensions, substitution or a seller’s offered-unit fit.

Documents and page references →

Manuals, parts books & more

Manuals & manufacturer documents

Available documents & sources

Accessory compatibility guide
PFAFF Accessories Catalogue 2026 · 2026; global English accessory catalog
Operating manual
PFAFF select 2.2/3.2/4.2 Owner’s Manual · 41339 10-26C English; ©2014–2023 KSIN Luxembourg II, S.ar.l.

Publisher links below distinguish a matched file from a listing.

Choose the document for your task: an instruction manual, service manual, parts list and accessory guide answer different questions.

Needle, bobbin & presser-foot details

Read the model-specific requirements with each answer before choosing parts.

Needle

Needle replacement

  • Exact select 2.2 under the explicitly covered family in 41339 10-26C English; ©2014–2023 KSIN Luxembourg II, S.ar.l.. No transfer to other edition, sibling, legacy select 1520/1530/1540, or optional feature.
  • Use the full exact instruction book for operation; these answers do not establish interchangeable bobbins, shank geometry, compatible items or needle substitutions.

Power off, foot lowered and needle highest: loosen screw, remove needle downwards; flat side rear, insert fully up, hold and tighten firmly.

Sources and pages
PFAFF select 2.2/3.2/4.2 Owner’s ManualPDF page 24 · printed page 24

System or size

Not yet verified

A general needle size/style/point range, universal system requirement and substitutions or equivalence are not established. The separate system_recommendation card records conditional 130/705 H troubleshooting advice; large-eye System 130 N remains a distinct thick-thread context, not interchangeable authority.

OEM needle recommendation and limits

  • Exact select 2.2 under the explicitly covered family in 41339 10-26C English; ©2014–2023 KSIN Luxembourg II, S.ar.l.. No transfer to other edition, sibling, legacy select 1520/1530/1540, or optional feature.
  • This is the exact troubleshooting recommendation, not proof of every needle size/style, arbitrary system interchangeability or the separately conditioned large-eye System 130 N recommendation for thick thread.
  • Needle-changing instructions on physical/printed page 24 require the main switch off; consult the complete procedure before replacing a needle.

The retained troubleshooting table recommends needle system 130/705 H for the wrong-needle cause of skipped stitches.

Sources and pages
PFAFF select 2.2/3.2/4.2 Owner’s ManualPDF page 7PFAFF select 2.2/3.2/4.2 Owner’s ManualPDF page 40 · printed page 40PFAFF select 2.2/3.2/4.2 Owner’s ManualPDF page 24 · printed page 24PFAFF select 2.2/3.2/4.2 Owner’s ManualPDF page 3 · printed page unnumbered safety page

Bobbin

Insertion

  • Exact select 2.2 under the explicitly covered family in 41339 10-26C English; ©2014–2023 KSIN Luxembourg II, S.ar.l.. No transfer to other edition, sibling, legacy select 1520/1530/1540, or optional feature.
  • Use the full exact instruction book for operation; these answers do not establish interchangeable bobbins, shank geometry, compatible items or needle substitutions.

Power off: PFAFF logo faces case; thread through slot A/under tension plate B. Hold case with bobbin facing you: pulling thread must turn bobbin clockwise. Lift latch E, then insert case fully on hook pin C, opening D up; sharp thread pull checks it cannot fall out.

Sources and pages
PFAFF select 2.2/3.2/4.2 Owner’s ManualPDF page 18 · printed page 18

Class or fit

Not yet verified

Logo/orientation instructions do not establish bobbin class or substitution.

Blue bobbins · OEM ten-pack

  • Exact select 2.2 through accepted 2026 PFAFF group C membership and this edition-specific item row only. Retain 2022 observations separately; no sibling, other edition, generic interface, retail-unit identity or procedural permission.
  • This is the exact OEM catalog item application, not a generic bobbin class, dimension, material, 820243 equivalence, substitution or seller offered-unit fitment.

The 2026 catalog lists blue bobbins, 10-pack, OEM reference 820779096, for group C, which lists select 2.2.

Sources and pages
PFAFF Accessories Catalogue 2026PDF page 5PFAFF Accessories Catalogue 2026PDF page 22

Presser foot

Presser foot replacement

  • Exact select 2.2 under the explicitly covered family in 41339 10-26C English; ©2014–2023 KSIN Luxembourg II, S.ar.l.. No transfer to other edition, sibling, legacy select 1520/1530/1540, or optional feature.
  • Use the full exact instruction book for operation; these answers do not establish interchangeable bobbins, shank geometry, compatible items or needle substitutions.

Power off, needle highest: press foot front up/back down simultaneously. Position under holder, lower lifter to engage pins; raise lifter to check engagement.

Sources and pages
PFAFF select 2.2/3.2/4.2 Owner’s ManualPDF page 22 · printed page 22

Mount or fit

Not yet verified

No universal shank geometry or compatible aftermarket item established.

OEM accessory group · 2026 catalog

  • Exact select 2.2 through accepted 2026 PFAFF group C membership and this edition-specific item row only. Retain 2022 observations separately; no sibling, other edition, generic interface, retail-unit identity or procedural permission.
  • An accessory group is not a standardized shank or holder geometry, bobbin class, needle system or retail item equivalence. The group D heading spans 5.5 mm and 6 mm machines; no exact per-model maximum is inferred.

The 2026 PFAFF accessory catalog lists select 2.2 in PFAFF accessory group C.

Sources and pages
PFAFF Accessories Catalogue 2026PDF page 5

Free-motion / darning foot · 2026 OEM catalog

  • Exact select 2.2 through accepted 2026 PFAFF group C membership and this edition-specific item row only. Retain 2022 observations separately; no sibling, other edition, generic interface, retail-unit identity or procedural permission.
  • Exact item only; no inferred standardized mount/shank, arbitrary aftermarket fit, sewing procedure or transfer to distinct 413039601 group J foot. A* hobby exclusions do not broaden the C/D application.

The 2026 catalog lists Free-Motion/Darning Foot, OEM reference 68028986, for group C, which lists select 2.2.

Sources and pages
PFAFF Accessories Catalogue 2026PDF page 5PFAFF Accessories Catalogue 2026PDF page 22

Specifications & documented facts

Specifications apply to the named model and document edition. Read any setup, fabric or safety requirements with the answer.

Threading

Needle thread tension

  • Exact select 2.2 under the explicitly covered family in 41339 10-26C English; ©2014–2023 KSIN Luxembourg II, S.ar.l.. No transfer to other edition, sibling, legacy select 1520/1530/1540, or optional feature.
  • Use the full exact instruction book for operation; these answers do not establish interchangeable bobbins, shank geometry, compatible items or needle substitutions.
  • Manual starting settings, not universal guarantees for every fabric/thread or a bobbin-tension adjustment.

Normal sewing: 4 to 5; free-motion sewing, darning and buttonhole: between 2 and 3.

Sources and pages
PFAFF select 2.2/3.2/4.2 Owner’s ManualPDF page 24 · printed page 24

Maintenance specifications

Hook oiling

  • Exact select 2.2 under the explicitly covered family in 41339 10-26C English; ©2014–2023 KSIN Luxembourg II, S.ar.l.. No transfer to other edition, sibling, legacy select 1520/1530/1540, or optional feature.
  • Use the full exact instruction book for operation; these answers do not establish interchangeable bobbins, shank geometry, compatible items or needle substitutions.
  • Only illustrated hook point, not all machine parts or substitute oils; do not borrow SMARTER no-oiling instruction.

Unplug and switch off; remove plate, lower feed dog and brush feed dog/hook area. Apply a drop of good-quality sewing-machine oil every 8 hours of operation to the hook at the illustrated point.

Sources and pages
PFAFF select 2.2/3.2/4.2 Owner’s ManualPDF page 2 · printed page unnumbered safety pagePFAFF select 2.2/3.2/4.2 Owner’s ManualPDF page 39 · printed page 39

Plate replacement check

  • Exact select 2.2 under the explicitly covered family in 41339 10-26C English; ©2014–2023 KSIN Luxembourg II, S.ar.l.. No transfer to other edition, sibling, legacy select 1520/1530/1540, or optional feature.
  • Use the full exact instruction book for operation; these answers do not establish interchangeable bobbins, shank geometry, compatible items or needle substitutions.
  • Switch off for plate work; removal uses a small screwdriver at right then left openings, after raising foot/removing accessory tray. Replacement lies flat at back and is pressed down at front until snapped in place.

Before sewing after needle-plate replacement, check the plate lies flat.

Sources and pages
PFAFF select 2.2/3.2/4.2 Owner’s ManualPDF page 2 · printed page unnumbered safety pagePFAFF select 2.2/3.2/4.2 Owner’s ManualPDF page 39 · printed page 39

Performance & stitch capabilities

Stitch-width and needle-position controls

  • Exact select 2.2 under the explicitly covered family in 41339 10-26C English; ©2014–2023 KSIN Luxembourg II, S.ar.l.. No transfer to other edition, sibling, legacy select 1520/1530/1540, or optional feature.
  • When selecting stitch width or changing needle position, the needle must be out of the material. Retain the original symbols and complete page rather than inventing a numerical dial endpoint.
  • The retained page supplies controls and restrictions, not an independently established numerical maximum. The 6 mm figure on page 30 is straight-stitch length, not maximum zigzag width.
  • For needle-position adjustment page30 additionally requires the needle at its highest position. Preserve the original page25 dial27 versus needle-position-heading dial28 ambiguity; no synthesized extreme-position operating sequence. The symbolic maximum here is not a numeric specification; separate accepted accessory-catalog width observations remain distinct.

The width dial uses a symbol for maximum stitch width; straight stitching uses width 0. The needle-position dial supplies fourteen positions in addition to center. At the right needle position, the width dial can increase or reduce the width of the stitch’s left side; the converse applies at the left position.

Sources and pages
PFAFF select 2.2/3.2/4.2 Owner’s ManualPDF page 7PFAFF select 2.2/3.2/4.2 Owner’s ManualPDF page 25 · printed page 25PFAFF select 2.2/3.2/4.2 Owner’s ManualPDF page 30 · printed page 30

Feed & fabric control

IDT equipment status

  • Exact select 2.2 under the explicitly covered family in 41339 10-26C English; ©2014–2023 KSIN Luxembourg II, S.ar.l.. No transfer to other edition, sibling, legacy select 1520/1530/1540, or optional feature.
  • Retain the exact named-model diagram and accessory table join. No later IDT version, retrofit, optional walking-foot equivalence or every-item application is established.

The retained standard-accessory table lists select 2.2 with standard, blindhem/overlock and zipper feet without the IDT system; its IDT parts-diagram label names 4.2/3.2.

Sources and pages
PFAFF select 2.2/3.2/4.2 Owner’s ManualPDF page 7PFAFF select 2.2/3.2/4.2 Owner’s ManualPDF page 6 · printed page 6PFAFF select 2.2/3.2/4.2 Owner’s ManualPDF page 7 · printed page 7

Part numbers & accessories

These are manufacturer part references. A drawing or matching number alone does not confirm that a replacement from a seller fits. Check the model-specific listing and restrictions.

Manufacturer catalog references are listed below. Replacement compatibility has not been checked.

Items listed for this model in the OEM accessory catalog

These conditional catalog answers join the named model to its catalog group, then to the exact item row. Keep the edition, item and pack limits. They do not establish a generic bobbin class, standardized mount, replacement procedure or a seller’s offered-unit fit.

Blue bobbins · OEM ten-pack

  • Exact select 2.2 through accepted 2026 PFAFF group C membership and this edition-specific item row only. Retain 2022 observations separately; no sibling, other edition, generic interface, retail-unit identity or procedural permission.
  • This is the exact OEM catalog item application, not a generic bobbin class, dimension, material, 820243 equivalence, substitution or seller offered-unit fitment.

The 2026 catalog lists blue bobbins, 10-pack, OEM reference 820779096, for group C, which lists select 2.2.

Full catalog answer and all conditions →

PFAFF Accessories Catalogue 2026 · 2026; global English accessory catalog · PDF page 5 · PFAFF Accessories Catalogue 2026 · 2026; global English accessory catalog · PDF page 22

Free-motion / darning foot · 2026 OEM catalog

  • Exact select 2.2 through accepted 2026 PFAFF group C membership and this edition-specific item row only. Retain 2022 observations separately; no sibling, other edition, generic interface, retail-unit identity or procedural permission.
  • Exact item only; no inferred standardized mount/shank, arbitrary aftermarket fit, sewing procedure or transfer to distinct 413039601 group J foot. A* hobby exclusions do not broaden the C/D application.

The 2026 catalog lists Free-Motion/Darning Foot, OEM reference 68028986, for group C, which lists select 2.2.

Full catalog answer and all conditions →

PFAFF Accessories Catalogue 2026 · 2026; global English accessory catalog · PDF page 5 · PFAFF Accessories Catalogue 2026 · 2026; global English accessory catalog · PDF page 22

Check the exact model and part before ordering. Missing information does not mean a part is incompatible.

Care, setup & service references

Use the full source procedure and its safety precautions. A short referenced answer is not a substitute for service documentation or qualified electrical/mechanical repair.

Insertion ↗Hook oiling ↗Plate replacement check ↗

Service-manual availability and service-only procedures remain unestablished unless separately cataloged and reviewed.

Coverage and source-review limits

Answers refer to the named document editions and their requirements. They do not cover the complete model history or confirm unlisted relationships or replacement products.

Coverage and remaining questions

Operating manual
Listed below; check the edition and available link.
Exact OEM part application
No model-specific part application is listed here.

Still to confirm

An unanswered question does not mean a part is incompatible. We have not confirmed enough information to recommend it.

Needle — System or size: A general needle size/style/point range, universal system requirement and substitutions or equivalence are not established. The separate system_recommendation card records conditional 130/705 H troubleshooting advice; large-eye System 130 N remains a distinct thick-thread context, not interchangeable authority. Full recorded limit & conditions →

Bobbin — Class or fit: Logo/orientation instructions do not establish bobbin class or substitution. Full recorded limit & conditions →

Presser foot — Mount or fit: No universal shank geometry or compatible aftermarket item established. Full recorded limit & conditions →

Other names, regional versions, production history, further specifications and documents are not fully covered here. Their absence is not a “none exist” finding.

Next evidence targets

  • Complete illustrated task review, broader specifications and exact compatible items require additional accepted evidence; the cited subset is not a complete machine reference

These are research questions, not claims that the missing relationship exists.

Sources and page references

Each answer links to its exact evidence passage below. Open a reference to see the document and page. These links identify the source; they do not include the full manual or its diagrams. Document access is consolidated in the OEM library above.

Document and page references (15)

PFAFF select 2.2/3.2/4.2 Owner’s Manual

Published by PFAFF · 41339 10-26C English; ©2014–2023 KSIN Luxembourg II, S.ar.l. · English

Document and available links →About this document →

PDF page 6 · printed page 6

Open the source document · PDF p. 6 ↗ About this document link

Applicability and edition

Checked against the document text.

Exact pfaff:select-2-2, retained41339 10-26C English. Model-labelled p6/p7 application, full page geometry source-author checked. Conditional troubleshooting/individual IDT-equipped model only; no sibling, equivalent system, retrofit, generic shank or maximum width inference.

PDF page 7 · printed page 7

Open the source document · PDF p. 7 ↗ About this document link

Applicability and edition

Checked against the document text.

Exact pfaff:select-2-2, retained41339 10-26C English. Model-labelled p6/p7 application, full page geometry source-author checked. Conditional troubleshooting/individual IDT-equipped model only; no sibling, equivalent system, retrofit, generic shank or maximum width inference.

PDF page 25 · printed page 25

Open the source document · PDF p. 25 ↗ About this document link

Applicability and edition

Checked against the document text.

Exact pfaff:select-2-2, retained41339 10-26C English. Model-labelled p6/p7 application, full page geometry source-author checked. Conditional troubleshooting/individual IDT-equipped model only; no sibling, equivalent system, retrofit, generic shank or maximum width inference.

PDF page 30 · printed page 30

Open the source document · PDF p. 30 ↗ About this document link

Applicability and edition

Checked against the document text.

Exact pfaff:select-2-2, retained41339 10-26C English. Model-labelled p6/p7 application, full page geometry source-author checked. Conditional troubleshooting/individual IDT-equipped model only; no sibling, equivalent system, retrofit, generic shank or maximum width inference.

PDF page 40 · printed page 40

Open the source document · PDF p. 40 ↗ About this document link

Applicability and edition

Checked against the document text.

Exact pfaff:select-2-2, retained41339 10-26C English. Model-labelled p6/p7 application, full page geometry source-author checked. Conditional troubleshooting/individual IDT-equipped model only; no sibling, equivalent system, retrofit, generic shank or maximum width inference.

PFAFF Accessories Catalogue 2026

Published by PFAFF · 2026; global English accessory catalog · English

Exact select 2.2 through accepted 2026 PFAFF group C membership and this edition-specific item row only. Retain 2022 observations separately; no sibling, other edition, generic interface, retail-unit identity or procedural permission.

Checked against the document text.

Document and available links →About this document →

Editorial responsibility & corrections

Alex Shick · Founder and editor. Corrections managed by Alex Shick.

This Pfaff select 2.2 guide is based on documents, with AI assistance to organize the information. We have not tested or repaired the machine.

Check the document edition with each answer. A source review date is not a machine inspection date or a promise that the manual is the latest edition.

Contact the SewIndex team or report a correction ↗

The correction address has been tested and its monitoring confirmed. We cannot promise a response or accept every suggested change.

Report an error with the model, document and page · About SewIndex and our method

About this information

Answers come from the documents named on this page. They describe those editions, and may not cover later changes to the machine or manual.