Which bobbin class does the manual list?
Before you use this answer
SINGER Class 15 is the documented standard accessory; material, dimensions and third-party substitution are not established.
Documents and page references →Needle, bobbin & presser foot reference
Singer M1500
Needles, bobbins, feet and other details for this model. Check the requirements before choosing parts.
Before choosing a part
Compatibility essentials
Start with these documented details. Read the requirements with each answer before choosing a needle, bobbin or foot.
- Foot attachment
The foot pin fits the holder cut-out; raise the rear lever to disengage the foot.
Requirements and sources →- Bobbin type / class
SINGER Class 15 bobbins are the documented standard accessories.
Requirements and sources →- Needle sizes by fabric and use
The table lists SINGER 2020 sharp, 2045 ball-point, and 2032 leather needles in fabric-specific size ranges from 9/70 through 18/110.
Requirements and sources →
Not yet confirmed here: Manufacturer accessory group, Presser-foot shank type, Foot holder / mount, Foot interface / generation, Bobbin material, Bobbin diameter, Bobbin height, Hook type, Needle system / designation, Maximum stitch / zigzag width, Feed system, Bobbin loading direction. What is still to confirm →
Model & names
- Model
- Singer M1500
Other names, regional versions and related models have not been confirmed here. A shared manual, product line or accessory group does not identify the machine's family.
What do you need help with?
How do I attach the foot or remove its holder?
Before you use this answer
Follow the full illustrated procedure and safety instructions. No standardized shank height or cross-brand foot ecosystem is established.
Documents and page references →Which needles and sizes does the manual recommend for different fabrics?
Before you use this answer
Retain each fabric and thread condition; no one needle type or size is universal.
Documents and page references →How do I clean and oil the machine?
Before you use this answer
Disconnect power first; use the marked hook location and stated oil amount. The manual does not quantify a service-center interval.
Documents and page references →How do I wind the bobbin?
Before you use this answer
Follow the complete illustrated winding procedure, including returning the spindle left before sewing.
Documents and page references →Which way should the needle face when I insert it?
Before you use this answer
Follow the complete needle-changing procedure and source safety instructions.
Documents and page references →Manuals, parts books & more
Manuals & manufacturer documents
Available documents & sources
- Operating manual
- Singer M1500/M1505/M1600/M1605 Instruction Manual
Publisher links below distinguish a matched file from a listing.
Choose the document for your task: an instruction manual, service manual, parts list and accessory guide answer different questions.
About this document & page references →
InstructionSinger M1500/M1505/M1600/M1605 Instruction Manual
Read the source document ↗
We checked that this file matched the source used here on 2026-10-12. The publisher may later replace its file.
Needle, bobbin & presser-foot details
Read the model-specific requirements with each answer before choosing parts.
Needle
Types and sizes
- Choose type and size for the fabric and thread; no one type or size is universal.
The table lists SINGER 2020 sharp, 2045 ball-point, and 2032 leather needles in fabric-specific size ranges from 9/70 through 18/110.
Sources and pages
Needle insertion
Insert fully with the flat side of the shaft toward the back.
Sources and pages
Bobbin
Winding path
Route thread clockwise around the winding tension discs, push the spindle right to wind, then return it left before sewing.
Sources and pages
Class system
- The page does not establish material, dimensions, or third-party substitution.
SINGER Class 15 bobbins are the documented standard accessories.
Sources and pages
Presser foot
Attachment mount mechanism
The foot pin fits the holder cut-out; raise the rear lever to disengage the foot.
Sources and pages
Holder removal
- The manual does not assign a standardized shank height or cross-brand ecosystem.
The presser-foot shank is removable from the presser bar.
Sources and pages
Specifications & documented facts
Specifications apply to the named model and document edition. Read any setup, fabric or safety requirements with the answer.
Owner features
Cleaning and oiling
- Disconnect power first; the manual does not quantify the service-center interval.
Remove lint regularly, clean the feed teeth and hook with the supplied brush or a soft cloth, and apply one to two drops of sewing-machine oil at the marked hook point.
Sources and pages
Care, setup & service references
Use the full source procedure and its safety precautions. A short referenced answer is not a substitute for service documentation or qualified electrical/mechanical repair.
Service-manual availability and service-only procedures remain unestablished unless separately cataloged and reviewed.
Coverage and source-review limits
The original source author’s manual research is reused here. Keep each model’s needle chart, fabric, thread and size restrictions, source conflicts and safety instructions separate. Related models do not establish replacement compatibility.
Coverage and remaining questions
- Operating manual
- Listed below; check the edition and available link.
- Exact OEM part application
- No model-specific part application is listed here.
Still to confirm
An unanswered question does not mean a part is incompatible. We have not confirmed enough information to recommend it.
Other names, regional versions, production history, further specifications and documents are not fully covered here. Their absence is not a “none exist” finding.
Next evidence targets
- Establish exact foot shank and replacement mount applicability separately from the documented attachment procedure.
- Add exact bobbin replacement identifiers, dimensions and hook-system evidence without inferring fit from handling instructions.
- Establish stitch-width specifications and preserve the current source limits.
These are research questions, not claims that the missing relationship exists.
Sources and page references
Each answer links to its exact evidence passage below. Open a reference to see the document and page. These links identify the source; they do not include the full manual or its diagrams. Document access is consolidated in the OEM library above.
Document and page references (7)
Singer M1500/M1505/M1600/M1605 Instruction Manual
Published by SINGER
Checked against the document text.
Document and available links →About this document →PDF page 1
Open the source document · PDF p. 1 ↗ About this document link
Applicability and edition
The retained OEM manual cover names M1500; claims are bound only to the accepted singer:m1500 identity.
PDF page 13
Open the source document · PDF p. 13 ↗ About this document link
Applicability and edition
Exact included bobbin class; material and cross-brand substitution remain unknown.
PDF page 14
Open the source document · PDF p. 14 ↗ About this document link
Applicability and edition
Exact winding path and spindle positions.
PDF page 28
Open the source document · PDF p. 28 ↗ About this document link
Applicability and edition
Source-native pin/cut-out holder mechanism and removable shank; no standardized shank height inferred.
PDF page 29
Open the source document · PDF p. 29 ↗ About this document link
Applicability and edition
Fabric-conditional OEM needle types and size table; no one type or size is universal.
PDF page 31
Open the source document · PDF p. 31 ↗ About this document link
Applicability and edition
Exact insertion orientation and depth.
PDF page 32
Open the source document · PDF p. 32 ↗ About this document link
Applicability and edition
Exact owner cleaning procedure; lubrication is included only when the shared manual prints it.
Editorial responsibility & corrections
Alex Shick · Founder and editor. Corrections managed by Alex Shick.
This Singer M1500 guide is based on documents, with AI assistance to organize the information. We have not tested or repaired the machine.
Check the document edition with each answer. A source review date is not a machine inspection date or a promise that the manual is the latest edition.
Contact the SewIndex team or report a correction ↗
The correction address has been tested and its monitoring confirmed. We cannot promise a response or accept every suggested change.
Report an error with the model, document and page · About SewIndex and our method
About this information
Answers come from the documents named on this page. They describe those editions, and may not cover later changes to the machine or manual.