Embroidery & sewing reference
Needles, bobbins, feet and other details for this model. Check the requirements before choosing parts.
Before choosing a part
Start with these documented details. Read the requirements with each answer before choosing a needle, bobbin or foot.
Low shank; optional SINGER presser feet and accessories must be designed for low-shank models.
Requirements and sources →With needle highest and presser-foot lifter raised, push release lever toward you; place new foot pin directly under holder slot and lower lifting lever to snap into place.
Requirements and sources →Use only SINGER Class 15 bobbins (transparent).
Requirements and sources →Not yet confirmed here: Manufacturer accessory group, Foot holder / mount, Foot interface / generation, Bobbin material, Bobbin diameter, Bobbin height, Hook type, Needle system / designation, Needle sizes by fabric and use, Maximum stitch / zigzag width, Feed system, Bobbin loading direction. What is still to confirm →
Other names, regional versions and related models have not been confirmed here. A shared manual, product line or accessory group does not identify the machine's family.
Read the recorded source conditions and complete cited document with this answer. Separate identity, edition, compatibility and retail fitment limits remain in force.
Documents and page references →Read the recorded source conditions and complete cited document with this answer. Separate identity, edition, compatibility and retail fitment limits remain in force.
Documents and page references →Read the recorded source conditions and complete cited document with this answer. Separate identity, edition, compatibility and retail fitment limits remain in force.
Documents and page references →Read the recorded source conditions and complete cited document with this answer. Separate identity, edition, compatibility and retail fitment limits remain in force.
Documents and page references →Read the recorded source conditions and complete cited document with this answer. Separate identity, edition, compatibility and retail fitment limits remain in force.
Documents and page references →Read the recorded source conditions and complete cited document with this answer. Separate identity, edition, compatibility and retail fitment limits remain in force.
Documents and page references →Read the recorded source conditions and complete cited document with this answer. Separate identity, edition, compatibility and retail fitment limits remain in force.
Documents and page references →Read the recorded source conditions and complete cited document with this answer. Separate identity, edition, compatibility and retail fitment limits remain in force.
Documents and page references →Read the recorded source conditions and complete cited document with this answer. Separate identity, edition, compatibility and retail fitment limits remain in force.
Documents and page references →Read the recorded source conditions and complete cited document with this answer. Separate identity, edition, compatibility and retail fitment limits remain in force.
Documents and page references →Read the recorded source conditions and complete cited document with this answer. Separate identity, edition, compatibility and retail fitment limits remain in force.
Documents and page references →Read the recorded source conditions and complete cited document with this answer. Separate identity, edition, compatibility and retail fitment limits remain in force.
Documents and page references →Manuals, parts books & more
Publisher links below distinguish a matched file from a listing.
Choose the document for your task: an instruction manual, service manual, parts list and accessory guide answer different questions.
About this document & page references →
Instruction manualRead the source document ↗
We checked that this file matched the source used here on 2026-10-05. The publisher may later replace its file.
Read the model-specific requirements with each answer before choosing parts.
Raise the needle fully, loosen the clamp screw and remove the old needle; insert with flat side to the back, push fully up and tighten the clamp screw. Do not use a bent or blunt needle.
SINGER brand needles are recommended.
No single universal needle system established; fabric-specific chart is not generalized.
Use only SINGER Class 15 bobbins (transparent).
Place the bobbin counterclockwise; hold it lightly while drawing thread through notch, follow the groove up and around the top, left then down; pull right to cut. Replace cover with left tabs in needle-plate holes and right side clicked down.
Low shank; optional SINGER presser feet and accessories must be designed for low-shank models.
With needle highest and presser-foot lifter raised, push release lever toward you; place new foot pin directly under holder slot and lower lifting lever to snap into place.
Specifications apply to the named model and document edition. Read any setup, fabric or safety requirements with the answer.
800 rpm maximum.
OEM labels: length 241 mm, width 512 mm, height 310 mm; net weight 8.4 kg.
100–240 V ~ 50–60 Hz; nominal consumption 55 W.
There is no need to lubricate this machine.
The LED lamp does not require replacement; if it does not light, contact an authorized SINGER retailer for service.
Connect the unit with machine off, slide it firmly into socket and level if needed. For storage select Park Position, remove the hoop when prompted and confirm; after carriage parks, turn power off and remove unit.
Use the full source procedure and its safety precautions. A short referenced answer is not a substitute for service documentation or qualified electrical/mechanical repair.
Service-manual availability and service-only procedures remain unestablished unless separately cataloged and reviewed.
Answers refer to the named document editions and their requirements. They do not cover the complete model history or confirm unlisted relationships or replacement products.
An unanswered question does not mean a part is incompatible. We have not confirmed enough information to recommend it.
Needle — System: No single universal needle system established; fabric-specific chart is not generalized. Full recorded limit & conditions →
Other names, regional versions, production history, further specifications and documents are not fully covered here. Their absence is not a “none exist” finding.
These are research questions, not claims that the missing relationship exists.
Each answer links to its exact evidence passage below. Open a reference to see the document and page. These links identify the source; they do not include the full manual or its diagrams. Document access is consolidated in the OEM library above.
Published by Singer · HP35593-05 English C5 · en
Checked against the document text.
Document and available links →About this document →PDF page 1
Open the source document · PDF p. 1 ↗ About this document link
Two separate model lines on the original cover; not a series, filename or document identifier.
PDF page 2
Open the source document · PDF p. 2 ↗ About this document link
Same original manual body identifies its subject as a household sewing machine.
PDF page 8
Open the source document · PDF p. 8 ↗ About this document link
Exact optional SINGER low-shank condition, no universal accessory fit.
PDF page 9
Open the source document · PDF p. 9 ↗ About this document link
Needle insertion and brand recommendation; no universal system inferred from fabric chart.
PDF page 18
Open the source document · PDF p. 18 ↗ About this document link
Transparent Class 15 literal; no material or Class15J substitute inference.
PDF page 42
Open the source document · PDF p. 42 ↗ About this document link
Connection with power off and level condition.
PDF page 50
Open the source document · PDF p. 50 ↗ About this document link
Hoop must be removed before carriage parks; power off afterward.
PDF page 56
Open the source document · PDF p. 56 ↗ About this document link
Disconnect before maintenance; original complete disassembly/reassembly remains required.
PDF page 58
Open the source document · PDF p. 58 ↗ About this document link
Original complete specification page visually checked; retain OEM labels and rpm, no inferred conversion.
PDF page 76
Open the source document · PDF p. 76 ↗ About this document link
Edition marker only, no model identity inference.
Alex Shick · Founder and editor. Corrections managed by Alex Shick.
This Singer SE340 guide is based on documents, with AI assistance to organize the information. We have not tested or repaired the machine.
Check the document edition with each answer. A source review date is not a machine inspection date or a promise that the manual is the latest edition.
Contact the SewIndex team or report a correction ↗
The correction address has been tested and its monitoring confirmed. We cannot promise a response or accept every suggested change.
Report an error with the model, document and page · About SewIndex and our method
Answers come from the documents named on this page. They describe those editions, and may not cover later changes to the machine or manual.